Concrete Stain. in/Outdoor. Industrial-Quality. Eco-Friendly. 19 Colors/3 Sizes. Order Color Sample First. (1 GAL Ochre)

We had curbing put in with a color added. It was really splotchy as though some looked dry and some wet and darker. Was not mixed oroperly. This stain solved our problem. Love the black curbing now in the yard. Looks neat and clean and covered all the mistakes. Wonderful product.

I bought this product to refinish a small concrete fountain. It was covered with white hard water stains. I removed as much of the hard water marks as I could and used the concrete stain. It covered amazingly well, even over the white stain I could not get off. I will probably put a second coat on some of the spots. I am also going to fill the finished fountain with distilled water next time, to prevent the hard water stains from coming back.I would recommend this product.

This product 100% deserves no stars. The only thing nice was the color I did one section only to test. Cleaned it, used etch and clean, rinsed, then stain application. After the 24 hours I checked on it and it was completely flaky in spots and all caked in scattered areas. It looked like a spray paint can exploded. This is not stain. It is watered down paint. I'm so upset that I wasted the other products just to test it and it turn out awful. Aside from that, I can't even get it off to start fresh with a different brand.

We were using airstone products to create a stone look around our new fireplace. Their product comes in several different color groups, and each has 4 colors. Unfortunately, you receivew fewer stones in certain colors, which can make it more difficult to create the combinations of stones you want for the wall. Instead of ordering more boxes of stones, I decided to look into paint/stain options. I experimented with these acid colors a little and they worked pretty well with the airstone. You definitely have to practice a little on different stones to see how it will turn out. These were not exact color matches (I didn't expect them to be), but the sample size was more than enough to treat a sufficient number of the stones to blend in nicely. The sample sizes should provide more than enough to get a good idea of what it would look like if you needed to stain a much larger area of concrete. I definitely recommend trying this if you want to color concrete or stone.

Stain wa a easy to applies apply and made our patio look new again.

It darkened the concrete but the sewer cover lids don’t sit truly flat so the color ran sometime after the first hour leaving streaks. I need to do more work to camouflage the streaky finish.

I love it. It made finishing our basement bathroom floor easy. The hardest thing for this old grandma to do was to get down on the floor to mark the striping tape. It is not perfect but I'm fine with it. I bought some expensive striping tape from the auto parts store it worked too well but it only covered about a third of the floor. There is striping frog tape but I tediously cut a smaller strip from the tape I had. Then, I poured the charcoal grey concrete stain into a spray bottle and sprayed the finer mist generously over all of the floor. Then, I put the setting for bigger drops that I spattered around. When that dried, I used a small amount of the white concrete stain and using a small paint brush did the veining, highlighting existing veins and creating more veins. The veining was so easy gliding over the previously stained floor. Then pulled up the tape. It leaked a little under the frog tape, but I happen to like that the best. It looked great but I did go over it all with a clear sealer. JUST A NOTE: This work was done on a never before sealed section of a 1936 basement floor that was cut out and new concrete section poured meeting the old concrete. The striping is more faded on the old concrete that was done with a similiar technique a couple of years ago, but is still visible.

I purchased this to stain the coping around my spa and pool area that was sun faded. I power wash my patio about every 90 days so I didn't bother with etching or cleaning anything. I just applied the stain as directed and it worked beautifully. It took me about 90 minutes to stain around the spa with two coats. I put down a puppy pad to keep my supplies on while I worked. I put the stain in an old pickle jar so it was easier to manage and I could put the lid on and shake the stain about every foot or so to keep the mixture even. I also had a small mister that I used to wet the coping prior to applying the stain. If I had any stain that ran down a tile I would just spray the area and then wipe it off with a wet paper towel. I put on a second coat and it darkened which was nice. I have since done around the entire pool area and I have ordered a gallon jug and I plan to do several coats before I seal it. I think I may try to stain my front sidewalk up to the house next.