WAPANE 3D Brick Peel and Stick Wallpaper, 3D Wall Panels Self Adhesive, Removable Wallpaper Waterproof PE Foam Paintable,for Bedroom/Living Room/Kitchen and Home Decoration (20 Pack, Red Brick)

I bought two packs of this peel and stick for a small DIY project. I wanted to convert my old tv stand into a fake fireplace until I buy the real deal. I’ve used my fair share of peel and stick, and this is my review of this one.Material: it’s very light, and airy. It has a paper consistency. It’s easy to cut, but, beware, the adhesive will stick to scissors or blades.Adhesion: It’s VERY sticky. Once it’s on—it’s on! If you put it in the wrong place, good luck with getting it off—be careful as you stick it.Application: It has a weird alignment. If your doing a small project or space, it shouldn’t be too noticeable. If you’re doing a large space (an entire wall) make sure you buy enough extras so that you can work on getting the lines to match. You’ll have to do some cutting to make it happen.Removal: If you try to remove this, the adhesive remains in the surface and/or paper will be left behind. If you’re planning to apply this to a wall—be warned that it does not come off clean.My recommendations: I’d say use this on furniture that you’d like to repurpose. If you’re putting it on a wall—it’s going to be tricky removing it without damaging the wall. Also, this is not good for backsplash projects. It’s not plastic, so that kitchen wear and tear might not be the best.

Product arrived on time! What I liked was the design of the foam 3D tiles. I also can see how this could act as insulation on the cold basement wall and provide a nice finishing touch. I liked how the adhesion was very sticky. Don't make the mistake I did and lay it on the floor with the sticky side down once the paper is off🤣 It's super hard to get off so I imagine that when I want to change up the design: there will be a lot of work to do on the wall once the foam tiles are removed. Know this...once the tile is up, you can bet the farm that tile is going nowhere! Finally, I like how it turned out even though I messed up in some places. I will probably be the only one who notices.I took off a star because the tiles were not cut perfectly straight so it made a lot of work for me to go back, remeasure and cut. Not a big deal for some but check that the edges are straight before applying.

This item is very tacking looking. It would be ok in a room that does not get much traffic. I tried 2 different colors they both are cheap looking. Amazon has changed their return policy it will be almost a month before I get my refund. Returned on the 13th July I am not getting my refund of just under $200 until August 6th. Like I titled this, Buyer beware!!!

I just finished installing 3D multi color brick wall paper in my living room covering a mirror above my stairs that I had purchased from Home Depot. I loved it so much so I decided to purchase this gray marble tone brick for my half bathroom downstairs. I ordered the twenty package to put on the wall with the window so that I would have enough for the 10% waste factor . Low and behold, I was literally scraping to finish the wall! I believe I only needed one or maybe two panels to finish the job correctly and perfectly. It’s been a while now and I forgot the exact amount needed. What I do remember was I was not about to order another ten panel box for just needing one or two panels. Therefore, I was piecing the tiles around the window.The tiles were so thin that if it accidentally touched the wall before you are ready to place it, the tiles would tear. The thin soft styrofoam backing was tearing making holes in the tiles. After coming from the other brick tiles from Home Depot and these tiles were different like day and night from quality to durability, no comparison. So bottom line, purchase at your own risk unless you are really good home decorating and installing this type of product, because I’m not. The other tiles were better to install and easier to work with and it had very sticky glue too, but you could pull off very easily and gently without damaging the tile panels.Because I had to lay the tiles in one direction and piece it together, I really didn’t achieve the design pattern like the website had shown, and this was the only website I found the gray marble brick pattern.

I have used similar peel and stick backsplash products before and this one sticks really well! Feels a little cheaper made, but looks just as good as the others.

I wishers more came in a pack. This can be a pricey process

I'm using these to simulate a fireplace on the utility box in my yard. So far holding up to the rain and Florida sun.

This is a great way to improve the look of any space. Easily hides imperfections and misaligned walls.