MCEnterprises 37357MC Motor Kit for Dometic Furnaces , Black

Arrived earlier than anticipate!! Exact match!! Seems like good quality and was easy to install.

My furnace no longer screams like prom night Peggy. Seems to put out equivalent volume. Time will only tell. Used everything in the kit including the motor cradle, but not the 1/4" bolts to secure it. I reused the old ones as they had lock washers and a larger head needed to keep it secured. The updated cradle accommodates the offset wiring out of the motor. To do this, you will have to remove the exhaust port, disconnect the propane line to the igniter, and remove the ignition assembly. Took me 2.5 hours for this job. I've seen another guy on YouTube try to reuse his cradle and had to cut back an area to accommodate the wiring offset. Probably to save time installing. We he turned the unit on for the first time the cylinder of fan blades exploded. Lol. My install had no issues.

Very generic - works as intended

In researching for a replacement motor for my camper, I found several different opinions on if this was a suitable replacement. I can confirm that it fits and functions as it should. My advise to others is to take some pre-op pictures of the wiring for reference and if you have the metal fans, there's a good chance they will be siezed to the motor shaft. I tried every trick I knew to get it freed but it wouldn’t budge. What ended up working was using a flexible BBQ grill lighter to heat up the fan portion. After a little heat it popped off with little effort. The new motor wires connect red to red, black to yellow. All in all, it was an easy repair.

it fit it runs, only time will tell. get more hot air into rv , but still not warm, like oldmotor

Exact fit and works good

Very quiet furniture fan motor. Watch internet videos for easy directions.

Did not need the mount. Once I got the old motor out, the new one went right in. Runs very quietly. Remember to use antiseize on the shaft of the new motor.

Arrived before delivery date, looks good quality. Installed with no problem, just have to get the position of the fans correct on the shaft to fit in the housing and need to join 1 wire as wiring is different from origional. Did not need the mounting clamp that was included, used the origional mount. Works 100% like new, blows great and is quiet, no squealing or ratteling.Very satisfied, good purchase.

Worked fine for 1 year 15 days. Now it's bearings are squealing.