Crystal Clear Hard UV Resin Upgraded Formula Ultraviolet Fast Curing Resin for Jewelry Making Craft Decoration, Hard Transparent Glue Solar Cure Sunlight Activated Resin Casting & Coating (200g)

I bought this product to use on polymer clay earrings. I had already tried a different brand and was very disappointed - after curing it still had 'squish' and you could press your nail or even your thumb print into it, no matter how long you cured it. I had almost given up on using UV resin at all but I ordered this stuff as a last attempt.What a difference! It's cures in one minute under the UV lamp and is as hard as glass. No squish whatsoever. It also hardly smells of anything whereas the other brand had an overpowering chemical smell.I broke a plastic piece off our caravan skylight and I thought I'd try using the resin to fix it. It's a hot sunny day so I figured the sunlight would cure the resin - eventually. I held the broken piece in place with masking tape while I squeezed a bead of resin along the crack. Then I went back to wipe a drip away and was stunned to find it had already completely cured hard! I was able to take the masking tape away immediately and it was as good as new. Superglue would have run all over the place, stuck to my fingers and still not stuck the piece properly so this was a million times better. Thick gel like quality makes it easy to control. The pack also comes with a couple of cute little silicone pendant moulds which I didn't expect.Highly recommend this product.

sets REALLY fast when exposed to UV, Impressive stuff, will be buying again.

I had been using another UV resin for a while and it had been taking over 30 minutes and it was still coming out tacky. This resin was a game changer! It only needs a couple of minutes under a nail lamp and it sets nice and hard with no tackiness. I'm using it primarily to bind earring backs to acrylic charms and it's great for it - better than any glue I've used.

I made a few little dolls eyes as a trial and they set really quick with a fast UV light with turntable I purchased also, it set in 8 -10 seconds, great product will buy more when needed. 👍

I currently only use this for coating air drying clay sculpts, and so far it has worked quite well. You might need to practice to avoid air bubbles, but the consistent isn't too runny or solid, so I find working with it alright. It's best to wear gloves as it can get messy and preferably in a ventilated area as the small is pretty noticeable. It dries relatively quickly under a 36W UV lamp, though after curing, it is best to leave it to sit as I find it hardens some more after the initial curing.

Works great but dries pretty fast so you gotta work fast with it. Quite a lot in the bottle and good that it came with a few molds :)

Very fast curing UV resin for home hobbying - jewellry making etc. Comes with a little spatula to help spread the resin - it settles very quickly and smoothly

Does what I needed it for fly tying and gives a good finish.Always store standing up or it leaks

Secan muy rápido (4 minutos) y desmontar es fácil.

This is a great UV resin that is nice and clear . It has very little smell .The cure time was quick . I use a lot of UV resin and will be looking for this in a larger bottle for next time . It cured hard and works well for jewelry .

Bubble size is small I just use a lighter to get rid of them. If you pout slowly less bubbles. Glue quality not sure what that is. Thickness is good, leakage if you over use what the mold requires will happen. Mix ability is good. And value for money is perfect! I've been resining for a long time. This is a good quality product

It had a big of a smell but not to bad. Works really well in a sunny area and comes with little silicone mold. It is a bit harder to clean up, I used an old craft brush to brush it on some little sculptures and had to just toss the brush afterwards cause I couldn’t get it cleaned.

Tested and two surfboard that each had 4 small dings, and it worked out great. Like it better than Solarez as it seems to cure harder than Solarez, has a more precision like tip, and comes in a sizable bottle. Because of the precision like tip can control the amount of resin to use, which make some small ding just one drop to fix, and can put clear tape over the drop to make in smooth let it sit in the direct sunlight for 5 minutes, then pill off the tap. Then let cure in the direct sun another 5 minutes. Then can let sit for a half our then can sand off if needed. Both surfboards are now water tight!