NSF Certified 1/4" O.D. Water tubing Hose Pipe for RO (Reverse Osmosis) Water Filter 328 Feet (100M)+Tube Cutter.…

TLDR: 🌟🌟🌟🌟🌟 This kit provided the ideal solution for my under-sink water heater installation, with a great selection of fittings and ample tubing.I was in the midst of setting up an under-sink water heater and faced the challenge of integrating it with my existing water line to the refrigerator, which had a smaller-than-usual 1/4" tube. My initial attempts to install a tee in the line were unsuccessful, resulting in leaks despite trying different fittings twice.Then I found this kit, which turned out to be exactly what I needed. It came with a comprehensive assortment of fittings, making it much easier to find the right parts for my setup. Additionally, the kit included plenty of tubing, which was a huge relief.A crucial tip I learned from this experience is to avoid using clear 1/4" tubing as a substitute. It's likely to cause leaks and can jeopardize the whole installation. This kit, on the other hand, provided reliable materials that ensured a secure and leak-free setup.Overall, I'm extremely satisfied with this kit. It effectively resolved my installation challenges and made the process of setting up my under-sink water heater much smoother.

I've been having a never-ending problem with leaky pontoons on my pontoon boat. I decided to fabricate a pumping system. I used this 3/8" tubing and quick connect fittings to connect a 12 Volt water pump to the drain plug holes. This kit came with a special cutting tool that makes precise cuts in the tubing. I used 90-degree, shutoff, 3/8" pipe thread, union, and "Y" fittings. It was amazingly easy to assemble and it works great.

Good and useful kit, used on our RO system.

Works great no leaks easy install

Great product and easy to install. The bag brought numerous fittings so you get everything you need to get the job done without having to buy additional parts.

well worth the value. theses fittings are pretty expensive bought alone. and the hose is potable water safe for my refers water/ice dispenser.

Came with alot pieces. I really only needed one, but I also used the shut of valve since the one in my basement doesn't work well. I reused my tubing since it was already long and only need to make some small cuts; the cutter came in handy as well. Certainly will keep everything else, when I buy another house or any family members have issues with leaks coming from there water tube connecting to their fridge. Easy installation and took less than 5 mins to do. I did notice the water pressure lowered a bit; so I am assuming from the two connectors I used.. Regardless it's not leaking and water flows good enough.

Nice kit with everything you need to run a water line from a filter to your ice maker or filtered faucet. Even has a sharp little tubing cutter.