PQY Black Aluminum Alloy Reservior Oil Catch Can Tank with Silicone Radiator Hose Compatible with BMW N54 335i 135i E90 E92 E82 2006-2010

Super simple install, watch some YouTube videos for install. Product quality seems great for the price. 10/10 recommend this catch can. Help decrease oil build up on those valves.

Fantastic! I had another 335i before I bought this one that came with a BMS catch can, and this seems to be the exact same thing minus the branding. Heavy, high quality feeling aluminum can, and the same high quality silicone hoses. The ONLY caveat is that it came with the cheapest hose clamps I’ve ever used in my life. 12 out of 10 for the money you spend. Take 3 dollars out of the two hundred you saved and buy some different hose clamps.

This catch can works, I have a 07 e92 335 with the n54, you need to remove your old crankcase vent hose that connects to the valve cover and the rear inlet, then seperate the hoses from the connectors, a lighter helps with this. Some people have the square - 4 clip design, where as I had the simple squeeze Clips. I recommend using hose clamps on not only the can lines but the rear inlet line and the valve cover line, just to be safe. If you do not re use your stock connectors this will seem like it doesn't work and the hoses are too small. Silicone spray lube helps with sliding the new hoses onto your old connectors and helps everything move when you are settling in the lines with the can for best fitment/look. If everything is installed correctly this catch can works just as well as any other brand, ND, BMS, ect. They are all pretty much the same thing just re-branded. Hope this helps

Très satisfait de mon achat. Je m'en serais voulu de payer plus cher pour des produits sur des boutiques spécialisées alors que dans les faits, il ne s'agit que d'un contenant de récupération d'huile. Le look est beau sous le capot, dans la mesure où vous l'installez adéquatement. Pour l'installation dans une BMW 335 (N54), selon l'endroit où vous souhaiter l'accrocher, j'ai trouvé les commentaires précédents fort utiles pour adapter la longueur des tuyaux, qui sont faciles à couper avec un couteau denté.

It fits well enough, however the bracket to hold it to the strut tower brace didn’t fit at all on my e61, so I just have it ziptied and it seems to be holding well enough. It does capture quite a lot of moisture buildup when the weather is cold out which is definitely relieving to know water isn’t circulating through the motor. On the off change you haven’t seen an install video and are reading this, you have to remove the connectors from the stock PCV hose and reuse them inside of the silicone hoses in this kit for it to fit. Some people just throw away that pipe but you do actually need it.