Thriverline 80mm FPV Drone Frame Micro Carbon Fiber Frame Support 1104 1106 Brushless Motors Micro FPV Racing Drone

This is my first pass at building this, and my first micro custom build. I need to improve it a bit by hiding the antenna/wires better.Although it says it supports both a 20mm and 16mm stack, you will probably want to go with the 16mm for clearance.my build:GEPRC Stable F411 16x16mm with ESC and VTXT-motor 7500kv2" Gemfan 2040 propsRuncam nano 2FrSky R-XSRpros: good quality, strongcons: very tight fit if you want 2" props. stacks very high

this really is a good frame. easy 2" build, plenty of room, flies well.i used the following:1102/11500kv motors2 inch gemfan propssuper_s F4 6a flight stackaio wolfwhoop camera with osdfrsky r-xsri tried the linked whoop style 3d printed cage, but it was too heavy with that on. might be that im using 1102 motors instead of 1104/1105, but it flies really well without the extra cage.really like this frame, Ill buy another one and do some 1105 motors i think. i tried to use a betafpv whoop frame and this was much better imo.

Had to sand it down a bit to assemble it, but its nice

Great little micro frame. About to start build just having hard time finding a stack (fc&4in1 esc) that’s small enough. The max height is 15mm for stack. It has both tiny whoop spaced holes and 20x20. Should go great with some 1105 motors (was gonna go 1106 but I think that’s a little big). Gemfan hulkie props and a Caddex EOS2 will fit perfect. Just have to figure VTX, if u don’t want to worry about VTx placement get a camera with a vtx and a trans built in like wolfwhoop type.

This was one of the funnest and most challenging builds I have ever done. The main challenge was tracking down all of the right components. That being said, I used the Lumenier LUX V2 Micro with a Makerfire 4-in-1 ESC and T-Motor F10 7500KV motors. The frame is great and if you're going to build a small drone...use this frame. In addition to your purchase, I do not even work for the seller, I am throwing in a custom designed prop-guard; check out the photos.You can download the prop-guard on Thingiverse with the ThingID: 3137965Happy flying,MechaGyver

Much better than i thought. Nice thick durable

Nice little package but they Could’ve did without the nylon spacers.

Very easy to assemble and very lite weight frame at 14 grams! Will accept up to 1106 motors. Put a 20 amp equipped flytower fc and I’m sure it’ll tear a hole in the sky and give 3-4 inch quads a run for their money!!!