Illuminate Your Drive! 🚗💨
The PHILIPS Ultinon Access LED car headlight bulbs (HIR2) offer a direct-fit replacement for halogen bulbs, delivering 80% more brightness with a cool white light at 6000K. Designed for easy installation and long-lasting performance, these bulbs boast a lifespan of 1500 hours, making them a stylish and practical upgrade for any vehicle.
Brand | PHILIPS |
Brightness | 1800 Lumen |
Wattage | 20 Watts |
Colour | Cool White |
Auto Part Position | Front Outer |
Operating Life | 1500 Hours |
Manufacturer | Lumileds, Lumileds |
Model | Access LED 2500 - Direct Fit |
Product Dimensions | 4.8 x 10.2 x 10.6 cm; 103 g |
Item model number | 11012U2500X2 |
Manufacturer Part Number | 11012U2500X2 |
Material | Metal |
Size | HIR2 |
Assembly Required | No |
Voltage | 12 Volts |
Manufacturer | Lumileds |
Country of Origin | China |
Item Weight | 103 g |
M**V
Just plug and play. No need to cut the dust cap.
Since last 3-4 years, I was searching for a 4200K fan-less LED headlight. So, that I can put dust cover without altering it and keep my headlamp free from dust & water. I don't like cool-white due to poor visibility in rainy season. I was dreaming when would Philips or Osram make a fan-less Warm-White LED. I could find fan-less led as well as warm-white LED, but not combination of both. Few weeks back, I decided to go for OSRAM 4200K LED, just added to cart. Later, I saw the Instagram post about PHILIPS 3500K LED and purchased it. I am thankful to Philips for fulfilling my dream. Even it size is similar to halogen bulb, it comes with a smaller cooling fan and copper cooling tube.Pros:-Since fan is too small, you need not have to cut the dust cap for Maruthi vehicles.-As others said it lights brighter than standard halogen bulb.-Warm white 3500K really help in poor whether condition compare to 6500K.-It just 20W + 20W compare to 65W + 65W halogen.-Even it size is similar to halogen bulb, it comes with a tiny cooling fan and copper cooling tube.Cons:-Yes, its over priced. It would be better if its under 3K Rupees.-Not sure about durability as Philips claims 1500hrs lifespan.-Not recommended for those who want high brightness. Those who want, same model with 65K(cool white) is available.-Light appearance would be better, if it has 4200K instead of 3500K color. But I know that it would compromise the visibility in poor whether condition.Recommendation:If your dust cap is too old or melted, it's better to use a new one or clean dust cap before you install it. You may apply Vaseline on the dust cap hole to insert the cap smoothly.
R**H
Not Worth at this range
Focus of light is not as good as company fitted halogen bulbs so I don't recommend it. Waste of money go for other brands and Kelvin should be 6000 k.
K**.
Better performance than stock halogen
This is perhaps the onlyFANLESSACTUALLY WARM yellow 3500KWithout a connector box1:1 sizeExact fitLed bulb available.It fitted my S cross reflector headlight very well. Since it is a direct fit with no connector box just like a halogen, there is no change required for the dust cap. It fits perfectly. Remember to align the led at 3-9’o clock position as shown in the pic.The photos show the throw of the halogen bulb and then the led. Notice the large hotspot of the beam pattern. No scattering. The throw is better than the halogen. Though the brightness is a bit less compared to other LED s but then we are using it in a reflector based set up. The halogen like colour with minimal scattering and glare alongside focussed throw just like a halogen is just brilliant. No issues with packing and closing of dust cap and due to colour no problem regarding challan. I will rate it as an excellent buy.The pic with working led inside the headlight was a bit tricky to catch but seeing the led in action just shows the amount of engineering and thought that has gone into the making of this product.
M**X
Much Needed Retrofit LEDs for Motorcycle
Purchased these LEDs a week ago after a lot of research on LEDs for my YZF-R3.Heres what I liked about these lights :-> Ease of Installation : These LEDs fit perfectly onto the existing H7 sockets, requiring no special tools to install. Also, the biggest pro is THE DUST CAP DOES NOT NEED PIERCING as with other LEDs with cooling fans/fins.->Functionality : I previously had the Philips GT200 H7 installed, and those are one of the brightest(and shortest lasting) OEM halogens that you can buy. I must say, these LEDs lived up to my expectation. They say [+80%] on the packaging which made me worried about the brightness compared to the GT200 but they are at par if not better than those. The throw is adequate and the lights are bright enough.Will update on the downsides here if I observe any.
S**
A fantastic H4 led bulb
Great product.Adequate brightness but doesn't blind other drivers with excessive glare.Perfect color temperature for Indian conditions.👍👍👍
M**Y
Overpriced, Brightness is better then stock H7 halogen lamp but not very impressive
I have used on the lower beam of my pulser 220f. Good thing about this bulb is that it has same size as H7 halogen lamp and it fits well on the pulser 220f doom, Obviously its a better solution then Bajaj stock H7 lamp.but as per price I am not very impressed with the brightness of this light. ₹5000 for 2 bulb is too much.
S**Y
Good and genuine product
Nice product, working good on vitara car, easy to install
P**I
Bed light. Wast of money.
Use in Brezza Zdi. Light is very bed. Visiable is not good. Even in dark night the road is not visiable. The sine board not clearly visiable in light. Only 13w of each bulb.The most important thing is that you did not refund the product ones you purchased it. Now I have to buy new bulb and the bulb become wast for me. My mony was wasted.
Trustpilot
4 days ago
3 weeks ago