Rich Choices Universal Black Motorcycle 22mm 7/8'' Bar end Rear View Mirrors GROM MSX125 CB500F Z125 pro Z650 Z750 Z800 Z900 MT-03 MT-07 FZ-07 MT-09 FZ-09 MT-10 FZ-10 MT-25 FZ6 FZ8 FZ6R SV650 SV1000

Great mirrors. Quality just like Puig and high end brands that have the same set up. I threw them on and they match the FTR perfectly!

Great fit for my Husqvarna Vitpilen, very easy to install but do note you'll need to add 2-3 washers to each side. Without the washers it will hit the rubber handles and not allow you to move the throttle. Great look, quality, and fitment overall with multiple ways to position the mirrors, definitely recommend.

They wasn’t the best but I adjusted it myself to fit my 2019 mt07.. wish it came with instructions and extra screws. anyways quality is good, worth the money.

I put these on a 2019 Triumph Speed Triple RS. Sadly, I dropped my motorcycle. I cried a little. Fortunately, I only broke the mirror and weirdly bent the key that was sticking out of the gas cap. After wiping the tears I looked for replacement mirrors. These only being about $25 was a plus. The red was a subtle addition to the red accents of the bike. Another plus. After reading the 1star reviews I was at the ready for cheapness and easily broken hardware. I was careful with the installation so no breakage on install. Plus. For the installation, these did not fit into the bike as expected. The Speed Triple has a bar end insert that has a “set screw” inserted that makes it very difficult to remove the insert. Additionally, I wasn’t sure if the OEM bar end insert provided vibration dampening g so I decided not to remove it. I was able to slip the mirror bracket over the bar end and then I installed the stock bar end “cover”. This set up left about an 1/8” space between the mirror bracket and bar end cover. I decided that did not look aesthetically bad. So, installed. Functionally, I like how I can adjust the mirror bracket outwards so the viewing portion of the mirror is outside my shoulders. The mirrors are smaller than stock so there may be some getting used to that. I haven’t ridden on the street at speed or on the highway, so not sure if there will be too much vibration to be useful or if they will stay tight, etc. I’ll be in the lookout for that based upon some of the other reviews. Aside from not knowing how they will function at speed I am happy with them. And for $25 I was okay with the risk.

Been looking for a pair of bar mirrors for my bike and man name brand ones are expensive. I understand that a quality item costs but I didnt want to pay a premium and not like them or find them not usable. These mirrors fit the budget to try and see if the money is worth it. Well Im happy enough with these mirrors that I am keeping these and saving the money for other parts!!! These mirrors are awesome!! I have more viewability with these than I did with the stock mirrors because of my body blocking part of the stock mirrors for rear viewing. These mirrors I rotated up so they were higher than the bars and the view behind me is on point!!! Overly happy with my purchase and am happy that if I mess one up or break one I will be buying another set of these for sure!!!

There are zero instructions, so you have to use common sense when attempting to install. I do industrial maintenance for a living, and it is physically impossible to install this the way it's intended. I had parts break while attempting and had to get a replacement. I gave the replacement one more attempt before moving my controls around and mounting the mirrors on my handlebars. You have to be REALLY careful to not strip or break the clamps, but they will fit and look OK. I wouldn't recommend these mirrors. I have a 2022 benelli tnt 135.

Replaced my Ducati motorcycle stock lights with these, perfect touch of red and just enough light. Great buy.

Great quality comes professionally Packaged, I gotta say these are one of the best mirrors for dirt bikes, pit bikes, motor bikes or even scooters if I can give it more stars, I would

These mirrors are a great replacement for the stock ones on my 2022 KTM 390 Duke. For the price, they do their job perfectly and look way better than the bulky OEM mirrors. Visibility is a bit more limited compared to the stock mirrors since these are about half the size. However, with the OEM mirrors, I could mostly see my own arms — with these, I get a much cleaner(but smaller) view behind me. They do vibrate more than the stock ones, but it's not a dealbreaker. You can still easily spot cars behind you. If you grip the bars tighter, the vibration almost goes away. Due to their design, I had to remove the stock bar-end weights. Personally, I didn't notice any negative effects after doing so. You can see how I installed them in the photo. Tons of adjustability — you can angle them however you like. I tightened them down quite firmly and they stay in place very well. Even if they shift slightly, it's super easy to readjust without tools. Overall: excellent product for the money! I hope I helped someone, ride safe guys!

Great product overall. No shaking while riding. A bit smaller vs. OEM but we get use to it very quickly. Note: They will not be tight enough on original handle weight tips and to use original tips, you need to do the following 2 things. 1- Use an 1/2'' pex crimp for the right side. Slide it over the threaded portion of the tip and then screw it back in place with the new mirror bracket. 2- Use electric tape to give a bit more thickness. Mine I needed only two layers around where you are installing the new mirror bracket. This will allow a proper fit and good tight install. Mirrors will not loosen up while you ride.. Many miles on it now and still stiff and no vibration at any speeds. 10 minutes install. Enjoy the look and ride.

As sleek as these look, "universal fit" is never a great idea. These do NOT fit the 2022 Kawasaki Z650, and this was after hours of blood sweat and tears trying to find work arounds to have this work. They just simply don't for this bike. The system for how to install these are odd enough as it is. they use a tensioning system, where a nut causes internal tension on the inside of the handlebar, risking damage. It is not secure, and even more so ugly. roughly 3/4 of an inch sticks out from the handle bar and it just looks... dumb. again i tried, but these will not fit your z650, ill try for a refund, but im not hopeful.

Installed these today. And noticed they were still not right so I tightened them a little more and broke one of the mounts for it. Unfortunately I am passed the return period. Hoping the seller would be willing to send the piece that broke still. I like the look of them. Just need not torque so much I guess

The visibility's easily better than stock mirrors on my CB500F, and it's nice having a clear view of what's infront of you Biggest downside people must consider is you'll have to remove the stability weights in the handlebars, which makes the bar a bit shakier and I think could increase chance of death wobble though I hadn't experienced it with these mirrors yet. Otherwise I recommend these 100%