G GEEKEEP Upgrade Smart RGB Music Sync Multiple Colors Chasing 16.4ft neon Led Strip Lights Cuttable and Linkable, Flexible Outdoor Led Strip Lights Waterproof, Button or APP Control led Lights Strip

The media could not be loaded. I bought this set because I needed about 10 feet of white LED strip lighting for under cabinet lighting. Decided to get the RGB LED strip to give me some more lighting options. I was able to cut off 10' (with a little bit of soldering) for my under cabinet lighting, and had enough left over some above cabinet party lights, too. The remote works quite well, even outside the RV (it's RF so it does not need line of sight) The sticky tape on the strip light actually holds quite well, but I did need to use the included super-sticky tape in a few spots. Easy to use, 12VDC power. If 12VDC is applied to the strip without the controller plugged in, it defaults to white (it's nice and bright bit of a blueish-white) or if you use the controller you have command of a wide variety of colors and effects. You can change the color, brightness, and speed of the LEDs, as well as choose from 9 preset colors, cycle through 366 preprogramed lighting effects, or just leave it on auto and let it do it's own thing. It remembers it's last setting, so if you turn it off or 12VDC power is removed, it will turn back on in it's last configuration. I may get another set to do the other side of the cabinets.

Amazerbeams. Works perfectly. Definitely wise to go with waterproof regardless of application as it is less likely to get damaged. I used these for footwell lighting in my car and it's awesome. Had to learn how to solder (you could use connectors) and wire to the fuse box using a fuse tap, but it was worth it. Nobody has lights like these in their cars because there aren't any addressable led kits (dream color) for that purpose.USEFUL FACT:When the off button is pressed, it saves the last run solid color or sequence, brightness, and speed. If power is cut and then restored later, it resumes the saved color or sequence. Ex. Red is selected, off button pressed, remove power, restore power, Red light, switch to blue-yellow sequence, cut power, restore power, Red light. So everytime I start my car it's dim red light, but if I feel like having a disco I have the option. And if I want to change the red to something else I just have to hit the off buttonAnother useful fact: The sticky backing works on some surfaces and not so well on others. BUT the extra double-sided tape included will stick anything to anything (probably permanently)

Remote stopped working soon after installation. Replaced battery still wont work strip just runs on auto lighting no way to control or change.

Colors are amazing. Only downside is that with certain colors you'd get some dead LEDS are LEDS that stay one color at the end of the strip. Also, a lot of times when the LED Strip is powered off by the remote but still plugged into the power you'd get faint flickering or a few LEDS towards the end would still illuminate even though you've pressed the 'OFF' button on the remote. Only way to fix this problem is by completely unplugging it from the wall or getting an Alexa-enable outlet that switches power to it on and off as my friend did. Good product overall. Just watch out for those few flawed LEDs.

Loving it looks great and bright like how it comes with a remote can change the brightness and all kind of colors

The media could not be loaded. OK, this is the verdict:The strings will NOT work joined after 5 strings.I put up 10 of the strings joined, with one controller and power supply for each string.After the 5th string, the 6th only lights up the first foot. then nothing after that.If I use a controller on the string that did not work, then it will light up fully, but if I connect it to the 5th string, No lights.I thought I had another bad string other then the one I have already returned, but even after trying out the remaining 4 strings, none of them worked.This is a disappointment, as I have put the light string all around my house hidden in the awning, so people only see the lights, and I was hoping that the single controller would be able to handle the entire string length, giving a good light show, but I just cannot make it work.If anyone knows of a trick or a fix, let me know.For the time being, I have installed a second controller at string #6 so I now have 2 different controllers, with different light effects which does not look good.So the sellers claim that one can connect up to 20 strings is NOT correct...Other than that... I like the different patterns of lights.. it really looks cool, I just wish I could hook up all the strings to one controller...Edit: There is a way, the seller came thru with a solution. I have attached 11 strings together with a single conroller, each strip has its own power supply, but they all work as ONE. The whole thing looks AWESOME!!

These work very well. The colors are great. I wish I could freeze a certain pattern that I like (red/blue) as it scrolls by (room for more versatility in the software). I have only had it for a week but I am very pleased so far. Puting on the extra tape was a bit awkward but it holds very well so I am glad to have it.Personal Tastes:* wish the software allowed more custom choices (i.e. chose a stationary pattern with 2 colors)* Red and blue are great…. wish the green was a little richer... overall it is just great