MakitaB-65399 Impact Gold 14 Pc. Titanium Drill Bit Set, 1/4 In. Hex Shank

I don't use a drill very often and didn't realize the drill I had didn't have any bits. I ordered these, and my son keeps borrowing them! Great quality, very durable. They fit both of our drills, and the cost was great.

These things are working out pretty well. They make holes and haven't broken or dulled.I really like the case. Holds the bits securely and are not a pita to get the bits out. The whole bit holder folds out so it's a piece of cake to remove and replace the bits.

Great excellent quality and sharp bits. My former Dewalt set couldn’t drill through butter. All the right sizes.

Reasonably good bits at a good price. But as others have stated, smaller bits are susceptible to breakage (brittleness). Found that 1/16" bit can clog when drilling aluminum which enhances breakage. (1/16 was wobbly too). In years past, I have bought such brittle bits from others. It's a tradeoff between hardness and flexibility.

They are hex shank for an impact driver, but that does not mean they are "impact rated".All of the smaller sizes are two-piece, a drill bit brazed into a hex shank. If you abuse these, they will break at the connection between the two pieces. Do not listen to these other reviews saying they break. These people are ABUSING these bits, waggling them around at max speed in an impact, probably drilling deep full depth holes, hammering them with the impact like a twisted chisel.The impact hammer should never engage with these if you're using them right. If the impact is actually impacting, rather than just spinning like a drill, SLOW DOWN.These are for CONVENIENCE & LIGHTENING YOUR PACK, so you can carry only an impact instead of impact + drill, they are not for demolition, high-precision, or mashing the trigger like a gorilla with speed cranked to max on your impact. The larger single piece ones will probably withstand that kind of abuse, but the two piece ones will eventually break. Use lower speeds & take it easy on the two-piece bits and they hold up just fine in wood & drywall. DO NOT USE THEM ON METAL. Thin aluminum is probably fine, but steel will absolutely destroy these. They are not for this. Go buy a set of m35 or m42 molybdenum cobalt HSS bits for steel & keep them lubricated.I've been using these for >90% of my low precision wood/drywall drilling handyman work for several months. I estimate around 500 holes drilled with the set, almost entirely with the mid-size two piece ones at depths less than 2". NO FAILURES, work just as well as day one.This is a very solid set at a great price. Just use them how they're intended. Stay within their limits.

Very good drilll bits ! I used them to pre drip holes in 4x4 x8 post the bits worked flawlessly

I really like the quality of these bits, and they stay organized in their case. I’ve put these bits to the test in lumber, pressure treated, and steel. They hold up, and stay sharp after heavy use. Everyone has drill bits rolling around looking for a place to be, but here they remain in their own measured slots, making them very easy to move around. I appreciate that!

Perfect drill bit set for my new condo's steel studded walls.