APPHOME New Foldable Headphone Stand Hanger Holder Aluminum Headset Soundbar Stand Clamp Hook Under Desk Space Save Mount, Universal Fit Gaming Headphones, Black

Bought this originally 8 years ago, absolute quality product with zero issues the entire time. Buy this. It is versatile and made of solid metal and not flimsy trash. Literally going on 8 years, and I just bought another. Not because it broke, but because it is so good. I needed a headset holder for a WFH job. Bought this again. Now I have 2 amazing products. Specifics: Can be adjusted to fit whatever orientation you need, vertical or horizontal, with the tightening knob inwards or outwards. It will work in any orientation. Made of SOLID metal, heavy, feels premium, because it is. The ONLY thing that is not the same as the day I bought it is that the adhesive, after 8 years of horizontal gravity tugging on it, has slipped a little. So the rubber top portion on the metal opposite the knob is slightly misaligned with the metal. Still protects the table perfectly though. That is literally the only semi negative thing I can come up with, and it took EIGHT YEARS for it to finally slide a little. Not a flaw just what happens when you use something every day that is designed to hold something up and gravity exists. If you are curious or hesitant, don't be. I now own two. They are so good and the original one I bought 8 years ago still works like the day I got it.

An ingenious little contraption, which is very well-made. It can accept any size headset with, or without a band. With smaller headsets, it could easily hold two of them. Folds up super easily when not in use. Looks great, and is very well finished. Has a very good clamp, which holds exceptionally sturdy and stable. It is also extremely compact, and while doing its job takes minimal space open, and even less space when folded up. Finally, it is easy to forget I have a large cumbersome headset, while not doing audio work at the office.

Got 2 of these to attach to my desk. Very sturdy, and basically all metal. Kinda overkill for headphone, but I use them to support a narrow PC, and it works well for me.

I really like this headphone hanger. I like it so much, I have three of them - two for headphones at two different desks, and one that I use to hang a long length of coiled microphone cable to keep it up off of the floor. There's a lot to like - it's a good design, well made, it's economically priced, folds up out of the way if you don't need to use it, and the surfaces are padded so that you don't mar the surface of wherever you decide to mount it. I'm going to get years and years of use out of mine.

The market for headphone hangers can be pretty overwhelming so I'll start by saying this has been a no fuss, reliable product that gets the job done. Main goal for me was to free up desk space for a large pair of headphones, while not scuffing up my desk. The mount is well constructed and has padding on the points that touch the desk. It's easy to move from one spot to another on the fly and seems like it'll hold up well for a long time. If your headphones are on the smallish side, it's possible you could hang 2 pair on here at the same time. I have a large set of Razer phone and they hang cleanly on the back half of the hanger, and I've yet to accidentally knock them off to the ground. Really no complaints on my end! Other reviewers have said over time the hinge can wear down so that it falls under it's own weight when you try to fold it up. After a month of use that hasn't happened to me so maybe it's irregular, or doesn't impact everyone. The simplest improvement to the design would be to magnetize the end of the hanger with just a small bit of polarity so that when it folds up it keeps it connected to the base and won't fall back down. I would suggest that or improving the hinge to be more sturdy so it takes more downforce to open it. Like I said, the hanger stays in the upright position for me after a month of use but maybe that happens after several months. Anyway, buy this product and you'll enjoy it!

I got a new headset recently for my gaming PC and noticed that lying the headphones on top of my case or on top of the desk was just not going to work. So I found this thing and am glad I did. I have a tempered glass desk that is about 1/4 inch thick. This tightens down onto the desk with no problems and does not scratch the glass. It has nice soft pads on it to prevent any damage to your desk, whether it be wood, glass, or metal. It can fit desks from 5mm to 45mm thick. (In case you're wondering, 45mm is 1.77 inches). It can also safely hold up to 5 lbs. This thing is well built. The vice part of it is made of solid steel and the body of it is made of hard powder coated aluminum. It feels really well built and exceeded all my expectations. It's not going to break on you. The advertisement says "installs in minutes." I found this to be incorrect. It actually installs in SECONDS. You literally put it on the desk, then screw the clamp until it stops. I would say 15 seconds max. I put this thing on the very end of my desk and now my headphones hang there totally out of the way and look much better than just lying them on top of my PC case. This is probably the best $15 I've ever spent on Amazon.

Honestly this is incredibly high quality for what it is. Metal construction, just about any desk size fits. Extremely simple to put onto the desk. This thing is awesome.

Eu acho o preço salgado para uma peça tão pequena e de utilidade básica. Mas, me supreendi com a qualidade do produto. Como já mencionaram, ele é robusto e você nota que foi feito de forma bem pensada e com material bom. Eu uso para colocar meu headset e é excelente, pois tem tipo uma borracha onde você apoia o headset, então não marca ou estraga. Para colocar na mesa foi bem simples e o ajuste dele é preciso e ótimo. Recomendo muito!

Compré este soporte para no tener mis audífonos tirados por ahí. Resulta que esta cosita está hecha de metal, de modo que se siente durable, pero incluye además partes en goma para no maltratar el escritorio ni los audífonos. Además se puede ajustar para ser vertical u horizontal, es discreto y se ve bastante bien. Me llevé la sorpresa de que el brazito donde se cuelgan los audífonos es bastante largo y caben hasta dos diademas al mismo tiempo (unos audífonos steelseries y unos mpow, al menos). Lo recomiendo muchísimo si quieres que tu escritorio esté mucho más limpio y con uan estética agradable, sobre todo si usas audífonos inalámbricos como yo.

デスクの天板だけでなく、支柱に縦にも取り付け可能なのが気に入りました。 この取り付け角度は、縦か横かの二択でネジに因る固定になります。ネジなのでひと手間掛かりますが、逆にしっかり固定されるので私はいいと思います。 フックを畳んだ際に軽く畳んだまま固定される点と、フックを掛ける部分にクッションが付いている点も好評価です。 付属の六角は(個体差と思います)曲がっていましたが、自分の物を使ったのでOKです。 ネジもお世辞にもいい品質ではないですが、二つ予備も入っているので問題なしです。 見た目も安っぽくなくて、この値段なら十分だと思います。

When it first arrived I was a little shocked by how small the package was but it is exactly what I wanted and does exactly what it says in the shop page. It gets my headphones off the desk and out of the way and is very adjustable (it comes with a mini screwdriver and screws to modify it to horizontal mounting instead of vertical. It also is much more secure than the others that look like they just stick onto the underside of your desk which I uhmmed and ahhhed about for a while. Glad I went with this one because of all the positive reviews. The build is solid.. and it has a cushy protective pad bit where the headphones will sit on it. It is also magnetised such that it will stay closed if you knock it or the desk. I'm really very happy with it and can recommend it in a heartbeat for desk organisation. Excuse the cord mess in the photos, that's a project for another day o_O.

Very good quality, still in use after 1 year of purchase