RokBlokz Splash Guards for 2015-2019 Compatible with Ford Mustang - Rock Guards Fit V6 - Ecoboost - and GT Models (Not GT350/500) (RED, Set of 4 - Front and Rear)

I've used a few different products, especially when I started running wider than OEM wheel/tires setups (that tend to kick more debris on the sides of the car). These are by far the best product I've tried.They're not bulky, have nice flexibility to follow the fender contour, and match the textures of the OEM plastics. They're supplied with very high quality fasteners, and these slick little screw collars that finish them off really nicely (they have the manufacturer name, I think it looks great, YMMV).The best thing about the install, is no tape/3M, so no concern about having to try to reposition them, tape coming loose, prepping the contact surface. The fronts use two existing fender line holes (with replacement inserts), and the top is a clip that connects to the inner fender lip.The rear uses three existing holes, the only slight "mod" to the car is the lower hole needs to be slightly enlarged (it's plastic, you could even use a small, round file). While the fronts can be installed by turn turning the wheels out of the way, the rears are pretty cramped - I just wound up removing the rear wheels, made it super easy (as always, use a good jack/stands/pucks).I gave the install 4/5, to clarify it's very easy, but since it does require a tool or two, the rear wheels to be removed, it's not something everyone can/will want to do (vs. something like a shift knob).Once installed they're very solid, look OEM, they're easily removed, I believe because of the materials for the flap itself combined with the stainless fasteners, these will last a long time.Also, which I've never seen before, they're offered in a few colors other than black!For the delivered price of $99, they're a steal.

Wow. I needed something to protect my fenders after putting spacers on all four wheels bringing the wheels out to where they should be similar to the GT350 look.Install was pretty straight forward, while the instructions aren’t the best it is still easy enough to figure out. The guards are nice and secure I have complete confidence in them. My only gripe is the plastic hardware for the install is a little brittle especially if you’re doing this in the cold. I recommend warming up the pieces inside right before you install them to avoid them breaking. I broke a few pieces during the install but the customer service was exceptional and they sent out replacement pieces the next day.The actual material itself is really nice and looks really OEM. They stick out enough to provide some coverage but not so much that they look gaudy and out of place. They match with my RTR side splitters very well.

I was a little skeptical of how these would fit and look on my 2019 PP2 mustang but I wanted to try something to keep those wide front tires from throwing rocks on my rear fenders and chipping them up. To my surprise the fronts were super easy to install and only took me like 15 min to do. They look great and are hardly noticeable on the car. I have not put on the rears yet and don’t know if I will any time soon as it will require removing the tires to do so. Instructions are great and easy to follow. PP2’s definitely need the fronts to protect the paint on the rear fenders. I recommend getting a set of these.

Easy to install. I didn't even need instructions but I saw that there's a QR code that takes you to different steps and instructions. It looks good and the price is right.

I'm installing wheels just slightly wider than came on the car. Even the factory wheels sometimes throw up stones that hit the side of the car. So, I decided to add a little protection.There are lots of alternatives, but my research discovered fairly common complaints about the others, usually about coming loose due to less robust attachment than the RoKBlokz.These ae the only ones I found that used existing mounting holes (no drilling) and did NOT use any kind of double-sided tape. They are easier to install if wheels are off the car which is a common situation regardless of manufacturer.The price is higher than some alternatives considering the cost of materials. But I didn't mind since these were superior in other ways.These can be ordered in various colors. But I chickened out and ordered black instead of a matching or complementary color to my car.

Looks good. Does exactly what I need it for since I have spacers on my pp1 wheels. It sits out just enough to protect your paint.

Fit was great on my 18 GT, front was super easy to install like 10min. tops. Rear though will take an hour as removing the rear tires is 99% a requirement, and rear guards are more complicated to install.Would've given 5 stars if not for the missing 2 screws for the rear pairs, fortunately was able to get similar screws elsewhere.

These RokBlokz Splash Guards are great! I had the no-drill guards on my previous Mustang. Not only were they more expensive (nearly twice as much as RokBlokz) but they were much flimsier and would periodically detach. The RokBlokz splash guards even come packaged with some extra “goodies” that show the company cares about the customer experience.Overall I’d say they offer better protection than most and should last longer than others on the market while looking good doing it. My only gripe is the instructions could use to be better. I recommend watching a YouTube video for a better idea of installation. Also, do yourself a favor and remove the rear wheels when putting these on as suggested. It’s (almost) an impossible feat as I found out if you don’t.

Pricey, But we all know the old saying "you get what you pay for". Great fit for a unique fenders / quarter panels.Quite easy to install with good instructions and images.

The rock guards were easy enough to fit and were really secure once on.

fits perfect on my 2019 mustang gt pp2.

Good product

This is a great product and fit well on my 2019 Mustang . But i have a Performance pack 2 with 305 tires all around .It would be nice to see a kit for the PP2 / GT350 models that are just a bit wider .Just my .02 .