MB-11 Marble Polishing Powder with Microfiber Cloth and Gloves - Spot Polish Water Stains, Rings or Etches to Restore Marble, Travertine, Limestone or Onyx

Amazing. Surprised how great it worked. Easily saved 100s of dollars on a professional repair.

This is the stuff! I had several water rings/etch marks in my bathroom vanity marble top. I don't normally like to name other priducts but feel compelled in this case --- i tried Lustro Italiano, and with quite a bit of time and effort I had some decent success. I ran out of it and decided to try something else. WOW! Night and day as far as effectiveness. It takes some rubbing, ( follow the instructions) but it's MUCH easier than the other stuff and works better. The vanity top looks better than the day I bought it. All the marks came out and it left a beautiful shine.

I have been a nervous wreck with our new double marble islands. Not a full year has gone by and etching appeared last week. I contemplated doing diy and buffing it out with a wet buffer, but I looked for products here first and watched several YouTube videos. This product took the etching right out and with not a huge amount of effort. I highly recommend this.

This purports to be a "complete restoration kit". It is not. It comes with instructions telling you that you'll need to purchase two additional products before you can use this one. One of those products is "Easy Oxy Daily Cleaner" (available on Amazon) and the other is a product called MB-5 that you have to buy from the manufacturer's website. To add a minor insult to the major injury, this "kit" comes with one microfiber cloth and instructions saying that you'll need at least two separate microfiber cloths.

The package came broken. The rag provided is not in a separate package. The countertop was scratched in addition to etching due to hard water and vinegar cleaning over spray. Took two hours to clean the small counter. The water powder ratio has to be just right to work properly. Do not use on entire counter at one time. Work a small area with mix and keep a dry buffer in the other hand and complete it. Once one area is buffed try not to overlap it will have an opposing effect and leave a defined line. Do not let the mix dry out when using by buffing the moist mix instantly. Need to apply 2-4 coats to completely remove etching of this nature. You can still see the spots underneath the polish. Did not fill in but reduced the dull indents on top. It was a 50/50 result. Had scratches not occured I would rate the product a 4.5 due to applying multi coats and took so long to do such a small top. Will contact the company for damaged product and results it causes. Will use again in other homes but beware rags must be brand new. Counter cleaned from dust, soaps, makeup, ect.

We had just installed a new manufactured white marble top in our bathroom and I mistakenly sprayed bathroom cleaner and then some vinegar while cleaning the rest of the bath. This resulted in some prominent staining and etching of the counter top. Based on some research I came across MB Stone Care Marble Polishing Powder. Following the directions it worked great and the etching was removed (end pictures included). Highly recommend, but note the following: - You will need to use some elbow grease! - Follow the included instructions - Use a PH neutral cleaner after polishing. This will make a major impact on the success of your work!! The company mentions theirs in the instructions. I used a 1 to 16 mix of Murphy's Oil Soap. - Apply a sealer after using the polish and cleaner. This will protect your work. I would have given the product 5 stars but the packaging for shipping was horrible. The product mix was in a fairly thin plastic screw top container. The container, a towel and instructions were place in a plastic bag which was then placed in a minimally padded mailing envelope. The result was a broken container with the powder leaking into the bag (see pictures). This should have been shipped in a cardboard box with adequate padding inside. Conclusion: great product and it works - they should fire their shipping staff.

I love this product, It was a bit more expensive but really worth it. I spilled vinegar on my new light marble bathroom counter. I cried because I thought I ruined it forever. See first picture where I circled several dull spots, you cant even see lights reflecting off of it. It's like the vinegar ate through the marble. I purchased this product (MB-11 Marble Polishing Powder with Microfiber Cloth) with hopes it would help a bit. It worked great! See second attached picture, you can see the shine on the marble, and lights reflect off the shine! You use very little of this product, and a lot of elbow grease. (I did NOT use a buffer). I followed directions. I had to repeat process twice, but you can see that it worked great! I also used the cleaner and sealer as directed...I never knew you had to seal marble. My counter looks new again! I am very happy with this product. I do agree with other customers that It would be nice if they offered it in a smaller container. I have tons left over!

So so impressed!! I've tried so many things to remove the spots on my marble table. It was riddled with full spots, cup rings, it was all blotchy. One treatment removed those dull spots and the table is now super super shiny. I'm SO happy with this purchase. Its worth every penny. Some was spilled in the bag, but I used it so nothing went to waste. Follow the instructions it comes with.