Tesla Model 3, Y, S, X Lifting Jack pad - 4 Pack

This product fits a Tesla Model Y perfectly. There are O-rings that keep the jack pucks from falling out. Tesla owners really need a set of these. For example, when I had the car state inspection done on my Tesla, they jack one wheel up at a time and the inspection station did not have them. The only negative for these pucks is the strong tire or rubber smell. This does not seem to dissipate even if you leave them to air out for 2-3 weeks. I keep these stored in the frunk in an air tight tupperware container because there was still an odor with double bagging in 2 ziplock bags. Pro's: Inexpensive and works. Con's: Odor.

These appear to be made by an independent person in MD. You can check out his website at teslapucks.com. The price there is $15 for a set of 4, but shipping's $10, so it's the same price as here with free shipping. Received the pucks and tried them out right away. Very nicely made. The "peg" on the puck with the o-ring fitsinto the Tesla's lift hole easily, and stays put due to retention from the o-ring, which then makes it easy to line up the dish of your jack and then lift it up. High-quality workmanship and they come in a handy bag. Some people have mentioned the rather strong odor, but it's nothing unusual. It's just new plastic and smells as such. Highly recommended!

I purchased these as cheap insurance against battery pack damage. I like to work on my own vehicles. Not much to do on the Tesla except rotate tires and lube the brakes occasionally. These pucks work perfectly. I’m fact, they hold in so well that during a family emergency, I got pulled away from the tire change and forgot to pull the pucks off. A week later I went to retorque the lugs and I couldn’t find the pucks. I looked everywhere and finally found theme still on the vehicle after driving 200 miles. They’ve held up well after several uses. Thanks for a great product!

Product was delivered as advertised. The rubber compound will imprint when you place it between the floor jack and a car as heavy as the Tesla S, but that is consequential. They are odorous and putting them out in the sun to dry out does not help. However, place them in a sealed food bag then back in the mesh bag for storage. My 2015 has 3 holes in the frame. The pucks will stay in place long enough to roll the floor jack in place. Otherwise, it was not a tight fit - the only reason for a 4 star rating. The odor is not offensive but is the exact same smell you pick up as you walk thru the door of a Harbor Freight store.

If you have a Tesla, even if you don't plan to work on it yourself, it's worth it to keep a set of these in the trunk. These securely fit into the factory jack points on the four corners of the car and ensure that you don't damage the jack point metal and also don't accidentally apply pressure to the battery that runs the whole length of the car's underside. If your car is at a Tesla Service Center for service then you can likely trust them not to do anything "bad" to your car. However, if you find yourself at some other service facility, such as when getting new tires or if you need to have a tire replaced due to a flat, then these will be a little bit of insurance for you. Just show the facility the pucks and explain how they work and ask them to use them when lifting the car. I mainly use these for swapping between summer and winter wheel sets in my garage. When you're using them for this purpose then it's likely you'll just use one at a time, but it's worth it to have the whole set for those times when a full lift is needed. Overall highly recommended. Pick them up today if you have a Tesla!

Just what you need at a cheaper price

Used them already for a DIY tire rotation on my Model 3. Work great, nice bag to keep it together in the car. The rubber ring let them stay in the holes while I cranked the jack up to meet the jack pad. These jack pads (basically like hockey pucks), were perfect size for the cup of my jack. Tire rotation procedure I follow: Lift by rear jack point.... put a block under front just in case(and lifting puck). From there you can remove both front and back tires to swap. Assuming you were smart enough to loosen the lug nuts before you lifted the car :-)

These TeslaPucks look solid and sturdy, and the mesh bag is nice (although it does not prevent the rubbery smell of the pucks from escaping, which means that the bag has a significant odor at least at first). I expected these pucks to be much heavier than they actually are. They fit well in the small cubby in the back left of the trunk (where they will not clunk around like they might in the. under trunk).

This keeps the folks who change my winter/summer tires twice a year happy. And since it reduces the possibility of car/battery damage while on a hoist it makes me happy too!

Not much to say, was planning to buy those when amazon came to Sweden, price incl shipping dropped with 75% for me compared to other Swedish Tesla part sites. AMZ is an evil cooperation but the convenience and price is hard to ignore.

Quick delivery and solid quality

as expected

Not used yet, thankfully. They were very strong smelling so I had to leave them outside for a few days to let them ventilate. Seem good quality.