8.5 x 11 Inch Waterproof Inkjet Transparency Film for Silk Screen Printing (50 Sheets)

Pretty good product! It prints well on our Epson. No complaints.

I use these for making a screen for screen printing. The print came out very well. I use the matte photo setting. When I got it wet it had a hazy spot after just wiping it off, I lightly used a blow dryer on low heat to dry it and the hazy spot went away.

Does exactly what I needed it for. To transfer patterns.

I tried printing black ink on this paper using my Epson WF 7710. The first attempt I put one sheet on top of my regular paper in the tray and pressed print. The transparency stuck to the plain white paper and the image printed on the white paper. Second attempt I put a stack of transparencies in my tray and this time they all came through the printer together. Third attempt, I put one transparency in the tray, this time only one came through but was apparently on the incorrect side of the paper. Fourth attempt, one sheet in the tray, correct side inserted, finally success! The correct side of the paper is the rougher side not the glossy. The glossy side just smears ink everywhere. Hope this helps!

Exactly what I needed for screenprinting

I bought a used package and it was totally fine. Every sheet was this type of transparency and there were no regular transparencies to try and fill it up. I had never used something like this and I've owned my own screen printing business for several years so I'm angry that this product has been available for so long. I could have avoided those long and expensive runs to Office Depot etc to get laser print transparencies. If you think you're going to align them up to create a bigger transparency, I'm not exactly sure I would do that. Be careful that you place tape on the "normal transparency" textured side. A cool thing that I found out accidently is that depending on what type of inks or dyes or printer puts out, you can wash these sheets like once or twice to get several uses out of them. You still get a "stain" from the previous print and so I would recommend a little longer exposure time to avoid that. These are super worth the money!

The sheets are veeeeerry slightly opaque but it doesn’t affect what I needed it for. Make sure you print on the side that is more textured or else they won’t work and also to set your printer to photo paper or glossy paper, that way the printer will adjust to reduce any chance of smearing. The ink dried quickly, no smearing whatsoever. The sheet has a nice weight so it’s not super flimsy. I taped the printed image on top of something and the tape gum stuck to the edges and didn’t come off because of whatever finish is on the film to keep the ink from smearing. I might print a reversed image next time so I can tape on the non-printable side and not have that issue.

I didn't notice that there is a printing side and a non-printing side until it was too late. I didn't notice if the description mentioned this issue or how to determine the right side for printing so here is what I do: if you have dry hands like me, you can feel which side is "slick" and "slippery" and which side feels like it has a super light powder coating. The one with the powder coating is the side to print on. If you have clammy hands like my husband, your fingers will stick to your fingers like glue and turn the powder coated side white where the fingers touched. This product is great and I use it for printing designs for screen printing. Highly Recommended.