POPMOON 304 Stainless Steel Bed Center Slat Support Leg | Adjustable Height Bed Support Legs | Height 6-1/2"and 14-3/4" Set of 3

Bought a new hybrid foam mattress. Once I disassembled the old mattress, boxspring and bed frame, I found the original bed frame metal slats were damaged with a couple attach bolt inserts pulled out. The original three metal slats also had support legs attached. I bought new wooden slats to support my new mattress and decided to use five wooden slats vs the original three to provide a stronger secure base for my new mattress. I realized the need for some type of support leg and found this type searching Amazon.A couple of the different brands had reviews critical on the plastic inserts used for the threaded bolt stem. The Popmoon brand clearly indicated all stainless steel construction and you could tell from the photo’s there was no plastic insert. I purchased five, one for each slat. The installation and adjustment of these was super easy. I am extremely pleased with this product and the simple install. Time will tell of the overall durability, but the construction is strong and I believe I will get many strong years of support and good sleep with the Popmoon Adjustable Support Legs.

These are perfect for what I needed. The 8 original wood legs started to buckle from movment and daily use. These new steel legs completely resolved that issue. One of the bolt had one defect (screw stuck inside) and seller immediately replaced and shipped it with no charge no hassle. I highly recommend this product. The rubber base on the bottom helps prevent sliding and scratching on hardwood floors. Great value, quality qnd ease of assembly. Thank you!Edited for spelling

These things definitely work. My slat bed came with a long center piece and some blocks to hold up the middle of the bed and these never worked. These metal struts work great as replacements and i have no concerns with the strength. But like another reviewer, for 1 out of 3 of the ordered brackets, the hole was too small to thread the stem and i don't have a strong enough drill bit to make a bigger hole. So i've contacted the seller to see if they can send me a replacement. 2 of them work fine for now but would be nice to have a 3rd.So overall these things do work. Maybe i got unlikely but it does raise questions about attention to quality control so ordering these things could be a bit of a dice roll.

I have a 20+ year-old canopy bed with three wood slats for mattress support. I had recently purchased a new mattress set that was large and heavier than my old one, I wanted to make sure the bed could support it.These steel feet, placed dead-center of each slat, and adjusted to the height of the side rails (or a tiny bit higher), are now supporting most of the mattress weight, and have stabilized the bed, dampening most mattress motion. (Any, ahem, vigorous movement would normally rattle the posts; now they barely move.)They are easy to assemble and require no instructions, which is good since no instructions are included. Just look at the picture to see what goes where. The work will go very quickly if you use a drill or impact driver to screw in the upper, V-shaped portion to the slats, but you could also do that by hand (although it could be tough if the slats are hardwoods).

Furniture is not made like it used to be. Often times the side rails on king size bed weaken over time and the mattresses and box springs go plop. I tend to be OCD and like to add support before the inevitable occurs so I purchased 3 sets of these popmoon bed slat supports. I was unable to fully install three of the supports because the bolt threads were not drilled all the way through. I attempted to drill the hole through however I was afraid I might damage the inner threads so I gave up. I discovered this only after I had already attached all nine to my slats. What an inconvenience. In the past I have used The Claw unibody/supports and never had a problem. I also noted that the glides on The Claw unibody support are all one piece and much better quality. I was unable to initially find them again and so I ordered the popmoons. I don’t believe I will order pop moon again because now I have to return three of them and I’ve wasted my time trying to set up my bed before delivery of my mattress set. And wouldn’t you know I have now found The Claw supports again. The listing states that 3/4 inch screws were included , but I received tiny #8 1/2 inch screws which are inappropriate for this type of project. My bed came with flimsy 1/2 inch thick plywood slats and I could almost bend them to the floor without breaking lol. But they have really nice bolt holes which coincide with the holes in the side rails on. So instead of discarding then, I glued and screwed a 2x4 to the underside. This really added a lot more support and at the same time lessened the distance to the floor. Now there is even less possibility of the support being wobbly. I love the technology which is an attempt to copy the functionality of the Claw. But quality control is totally missing with 1 out of 3 being flawed.

okay so this REALLY helped our sagging bed. We were so frustrated because we got this nice new bed and nice new frame but no matter what we did the bed sagged! The bed manufacturer gave us some supports that go underneath but they always slipped out. I was almost ready to toss the frame and get something else (which is a real shame because this bed is so beautiful!) but these supports really worked. I can adjust them when I need to and I haven't had any issues with the bed since. It's been really great!The installation was pretty easy - our bed was already put together and included screwing in the slats so I had to slide underneath the bed and do it with a flashlight but it still only took about 15 minutes. 10/10 recommend taking the mattress off the frame before going at it. haha

I used these to support my king mattress which sits on an IKEA Hemnes platform bed in order to prevent sagging of the mattress in the middle. Drilled holes in the middle supporting bar and fastened these supports. Bed is super solid! My only complaint is the price…seems a little over priced but I couldn’t find anything similar elsewhere and I didn’t want to make my own.

We were a little unsure if these would do the trick our current headboard footboard combination only has little side supports so we thank side supports so we felt like when both of us were in the bed it was caving in the middle. Assembly and installation was super easy you just need a drill. Our bed feels much dirtier and no more sagging feeling in the middle.

I'm glad I got these! Didn't need to replace the entire slat section or get additional pieces. Purchased my bed and almost immediately the middle leg kept falling out. So this solved the problem!

I needed central supports for King size mattress and board. These supports appear to be well made and assemble easily. Finish looks good. All parts including screwdriver included. Quick delivery.

worked good but could have spent a little time in welding the foot on. all three feet were not level and flat when attached to the leg, one was almost 1/4" off level...really,