High quality and complete electrics all wiring harness wire loom assembly for ATV / QUAD parts. Fits almost all years Chinese made 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc electric start upright engine. Works with ATV / Quad / Kawasaki KLX / Coolster / Scooter / 4 wheelers / Buggy / Dirt Bike / Go Kart /Pit Bike/ Motowork more. Compatible with Kazuma, Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing. Package include: 1 x ATV Wire Harness 1 x CDI (5Pin AC) 1 x Ignition Coil with Lead 1 x Spark Plug 1 x Solenoid Relay 1 x Rectifier (Voltage Regulator) 1 x Stator (Magneto Generator) 1 x Ignition Switch (2 keys, waterproof) 1 x Upgraded Multi-functional ATV Switch Note: 1）DO NOT FIT: GY6 motorbikes and other 200cc - 250cc Zongshen Lifan ATV / QUAD with different stator or CDI. 2）This item does not include a manual, Professional installation is highly recommended and false assembly may cause fire on the harness.
R**N
Very disappointed
This is not a direct replacement if you own a ATA-110-B Taotao ATV. It doesn't come with instructions. It's more of a universal harness and roll the dice to see if you can figure it out. I personally recomme you plane a day to figure it out. I had so much wire left over it was stupid. I will add some wiring diagrams I got on line to help my fellow fathers out there. Hope it save you the time it didn't save me.
H**N
Keep it simple stupid
You can Damn near use this harness to wire any atv. I used it to get a Suzuki LT80 running stronger than the stock one. Its cheap and it works. Everything's included to make a 4wheeler run. I just reused my stater and starter everything else is on harness. Very simple also wired up a rat raider 90cc (chinese atv) which is what its made for. Works perfect. Also made a portable cdi box with one to take to a buy that the atv wont run and 9 times out of 10 my red neck cdi will get it running on the spot. After I make the deal of course. People are usually dumbfounded lol
T**.
Does NOT work for Taotao 125D with gear indicators.
Purchased to replace the harness on a Taotao 125D with reverse and gear indicators. First off, it didn't come with any connections for the gear indicators. The back brake a back brake light connectors were male connectors, but the connections for the back brake and back brake light were as well, so they wouldn't connect up. This comes with two commections for headlights, but the quad I have is a single headlight. After getting it all wired up, it wouldnt turn the engine over, which I confirmed can happen by jumping the starter. I am going to troubleshoot the components tomorrow. I'll post an update on my findings, but I doubt I'll buy this ever again.
J**A
Does the job. You get what you pay for!
Installed it in a coolster 110cc ATV, everything worked fine, quality does feel cheap but it does the job, $48 for all you get seems fair to me.The only problems i found was:1. It was shorter than my old wiring hardness2. Quality felt cheaper than my original hardness (as expected)3. Doesn't bring instructions for people with less knowledge messing with wires4. Wire colors dont match my old wires, (brake light wire)Wires are shorter than the original hardness so relocation of the starter solenoid might be require, i left everything where it was before and for those short wires i just replaced then with my old one to make sure everything was in its original place.
L**K
Look at wiring connections in the pictures before you attempt to install
Let me start off by saying Covid 19 makes me a tinkerer (time to spare).. 4 wheeler was under 4 ft of water from Hurricane Harvey Sept 12, 2017. It set untouched until April-May 2020, I got the urge to mess with it.. started out trying to get it to turnover to see if motor was froze, well turns out the starter was froze, bought one from Amazon put it on, hot wired it and it turned over the motor, so then I try everything to get all get the switches and relays working.. I messed with it off and on for a day or two trying to figure out what switches and relays worked and which ones didn't until I finally decided to buy this wiring kit, I put it on with one minor wiring issue it turns over as it should, has spark to the spark plug, now I have to change the oil several times, clean the gas tank or order a new one and put on a new carb (which I also bought from Amazon) and it should run.. All in All satisfied with wiring harness
J**R
Check your Stator. You can use this wiring for most things. You can get a cheap one anywhere
Kangdi 125cc it was basically what it says. However it comes with the wrong stator. My bad I'm sure.
S**M
Little short and still won’t start
Harness was ok atv just won’t start with the button, everything else seems to work fine. I bypassed the start button and it ran great. I was trying to contact the seller but kept getting an error message.
J**B
No spark (they sent new one, perfect now)
I bought the harness and had for a couple weeks! Tried to crank the first time and it had spark, but I ran out of daylight. Came back 2 days later and tested spark again, and I had nothing. No matter what I do. Would like to swap out but we will see******Got in touch with them, and they sent me a new one and it worked great!!! No complaints, was glad it was able to be swapped!!****** 2star to 4star
Trustpilot
2 months ago
3 weeks ago