BedrugClassic Bed Mat | Fits 2015 - 2024 Ford F-150 67.1 Bed (Includes 22 - 23 Lightning (Models w/ Spray-In Or No Bed Liner), Charcoal Grey | BMQ15SCS

These are a little expensive for what appears to be a piece of foam, but it is precision laser cut, and there's nothing else like it on the market. I was able to slap this down in less than an hour, just needed to thoroughly clean out the bed and line up the adhesion strips.When I first put it down the corners near the tailgate kind of sat up a bit, but they seem to have settled over time.Here's why I went with this version of the bedrug. If you get the full bedrug for the sides and tailgate, you're going to need to take stuff off the truck if you want it done right. That's a lot of work, and if you're doing all that work then you're probably going to want to protect it. So now you're talking about getting a tonneau cover as well. I won't get into it too much, but from my research, there's no perfect tonneau. You either lose bedspace or window view, and getting one that's waterproof seems pretty rare. At the end of the day, it just easier to not have a tonneau. I also don't want a spray in liner. I've had them in trucks before, and they're great for hauling heavy duty stuff, but I've found the majority of the material I put into the bed needs to be treated with some care. I'm looking to haul payloads from Costco, not the rock quarry. That leaves rubber mats as an option. I could go that route too, but really the bedrug lets you slide things in the bed, but also keeps them from sliding. I find it's just the right amount of friction.

This is a limited use review since the BEDRUG is being used inside a truck-bed cap. How it waistbands the elements is therefore not tested. But, particularly inside a cap, truck-bed abuse to knees would be an obvious review item. Comfort is the best description. It’s probable a person would need no additional padding if sleeping on the BEDRUG. Crawling around inside a cap feels better than being on a rug at home. The surface knap is short. I doesn’t hold onto dirt, leaves, pine needles, etc.; meaning these vacuum off with relative ease. The other BEDRUG benefit is temperature. Cold steel under hand or knees is gone. BEDRUG BMQ15SCS Bed Liner Sold by Overstock Auto and Fulfilled by Amazon was purchase 10/2016 for use in a 2016 Ford short bed (5’ 6”). Appreciate the result. Fits the floor dimensions well. Shipped rolled up wide enough it took only a short while for the BEDRUG foam backing material to relax and lay flat. For use without a cap, Velcro was provided to prevent air flow from lifting it with an empty bed.What’s left is putting a knee on the tailgate. Solution; an even more versatile use product. BEDRUG BR2X4MH Havoc Offroad Track Mat Ships from and sold by Overstock Auto; available via Amazon Bedrug BR2X4MH Havoc Offroad Track Mat. Keep it just inside the cap and put it on the tailgate when needed. You’re good to go. Use it on the ground when getting under whatever (truck, etc.). It creates a comfortable change. Soft under your back and no ground temperature chilled body, head, etc. Lite in hand, fast to deploy, it might see more use than you would think; in a garage or on a job. Kneeling on it to do work is as comfortable as the BEDRUG. Sitting on it instead of bare whatever keeps the bottom end temperature and padded comfortable. Use it indoors or out. Just be aware the strictly foam side is susceptible to damage from pointed objects. Came branded Havoc, but it’s BEDRUG.

I ordered this to protect my knees and cover the scratches on my truck bed. It arrived rolled up so I laid it out on the cement in the sun in about 70 degree weather. In about an hour is was basically flat. It is made to fill in between the ridges in the truck bed. It is about an inch thick and is made of a stiff foamed plastic topped with what feels like very short nap outdoor carpet. It fits well but not perfectly tight instead there is a fairly uniform 0.5 inch gap. I think it is fine that way. It was very easy to install. You end up with about 3/8 inch minimum padding everywhere. It feels like a carpeted floor under your knees! I think it will hold up and be easy to clean. My only concern is the exposed edge facing out that may be damaged. I intend to make cap or something to protect that area. The very outer edges of the truck bed do not have the same ridge pattern so the very edge of the bed mat curve slightly up. I don't think that will cause any trouble just being complete. Overall A+.

I always wanted a bed full bed rug but we had the bed liner spayed as part of the purchase deal and I figured a full rug would be a waist of money. I still wanted the softness of a bedrug in there and this was a perfect compromise, in fact, I think this is even better. The bed is fully protected with a spray liner and the bottom is soft and protected even more. The is a perfect fit and was an easy install. May be a little steep price wise, but it has to be better than a rubber mat for my my needs since this is not a work truck. I'm putting an aluminum tonneau cover on it today as well so the bedrug will be awesome.

Love the bed rug, it took me 5min to install and it looks great.

I thought there would be a stitched BedRug logo in the mat. The fit is pretty close for the 2022 with a Line-x liner. Could use more 3m strips and another pack of adhesive helper. At the end of the day, it does the job and cleans up pretty easily with a blower and a shop vac.

Fit perfectly. Good cushion. Did not use velcro straps due to having a hardtop cover. Highly recommended.

Ordered the wrong one, but customer service was great and got me fixed quickly. The material thickness and density is impressive. Love this liner!

Fit my truck box well. Easy to install.

good

Makes the box look clean and neat! I wanted something that would be easier on my knees when climbing in and out and it is great. Very durable so far