3mm 1/8" x 12" x 12" B/BB Baltic Birch Plywood Squares (36pcs) - Perfect for Arts & Crafts, School & DIY Projects, Drawing, Painting, Wood Engraving, Burning & Laser Projects - Cherokee Wood Products

Falcon Pro 22W Just ordered the 15” square sheets last week and they arrived today, I checked them out and find them relatively straight for a 3 mm thick sheet of plywood. Checked thickness with my calipers and it is spot on. There are occasional small knots on one side 1/4 -3/8”, this are very manageable. Some have bigger spots that have been filled and sanded smooth as you can see in pictures from other reviews. They are carefully shrink-wrapped for shipping These boards cut easily on my machine at about 500 mm/m with full power. Absolutely love that this comes from a US source.

Excellent material for a laser cutter. (Be aware (!) slightly bowed so set the depth of your cutter in vicinity of where you will be cutting if you are cutting a small area. I haven't tried any process for making it flatter and I haven't tried cutting anything using the full size of the sheet.) Good buy for the larger boxes of sheets. Comes very well packed against water; cardboard box should be sufficient to protect the edges. A 40 sheet box weighs 19 pounds so just expect that before you go to pick up the box if you get a large one.

These boards have less coloration defects, are truer/flatter and less physical marring than what I found on the shelf at michael's... For less than a third the price! At michael's I found a similar 1/8" 12x12 baltic birch plywood sheet that was clearly tossed around and scratched for 5 bucks... It also had the barcode sticker which left a glue residue smack in the middle of one side. Here I have a stack of pristine sheets glue-free that are nearly devoid of defects for about a $1.30 each in a stack of 48... The value is through the roof and I'm definitely going to reorder when I manage to cut my way through this whole stack!

Overall nice quality. The size is great. I’ve had a hard time finding this size or similar to fit in my machine big enough for larger projects without having to cut it. Overall good product. I had maybe 2 warped boards, and even those were only slightly warped. Previous suppliers I would have half the stack warped. Only complaint was that out of the 32 was that about 8-10 had fillings in the back which made them unusable for finished products. Kind of sucked when I was trying to finish up Mother’s Day orders and ran out of good pieces. I had to go to my larger pieces and trim them down and now have to order more of those for my larger projects. I understand knots, but the patches are a bit obvious.

I'm about 1/3 the way through the box. All sheets have been dead flat, and the show side is flawless. I am using 5-6% power for raster engraving @ 100mm/s and vector engraving @ 20mm/s. For vector cutting, I bump the power up to 16% @ 8mm/s. It slices the wood like butter. No issues with any voids. Even the finest cuts come out perfect. Check out the almost paper thin mask strap on the ornament picture. FWIW, the National Park Service sign is free from ThingiVerse. The ornament design was $1 from Etsy. I rarely give a 5 star review for products. This one deserves it. I will be buying more.

Great quality wood, Ive gone through three 48 count boxes just this Christmas season making ornaments and lasering photos. Like all thin ply it tends to warp a bit as the humidity varies, but that is easily remedied with some carefully positioned rare earth magnets. Out of that nearly 150 pieces of wood Ive gone through I have hit maybe 2 or 3 internal knots which is quite remarkable. I will use this product again and again

I wanted to try the 15"x15"x3mm for laser cutting projects with an Xtool D1 Pro 20W. The wood comes well packaged and shipped quickly as it was within the same state. The wood initially was cutting well but creating a ton of smoke, more than other laser craft wood sheets that I have purchased at Amazon. The cuts became increasingly worse and I had several cut failures due to glue pockets to the point that it affected my production capability for either having to recut or try to salvage the project by cutting the rest of the parts out with a craft knife. I purchased the 32 sheet pack and still have about 1/2 of it left or just a little more than half. I cannot use them anymore as the quality and reliability are not there in my opinion. The smoke also began to affect my machine as the exhaust system for my enclosure which works very well was getting overwhelmed by the smoke from the burning glue which also started coving the laser head to the point that I had to disassemble it to clean out. The wood was so hard to cut for being 3mm. It took more passes just to cut through each project where my other sheets were a way less smoky cut and only needed 2 passes at the most to cut through cleanly. I also suffered damage to 2 cover lenses in the process due to excessive smoke even with air assist, an enclosure, and very good ventilation. I have had this laser for over a year and never had to replace the cover lens before now. Luckily I purchased a couple of extra cover lenses, just for situations like this. I have never seen any other wood sheets smoke as much as these did. I hope that this was a "one off" experience and others are not having the same results, but I will not be making another purchase of this material, I cannot risk my machine any more than I have. I'm going back to the tried and true brand that I have been using for two years now.

I have purchased 150 sheets of this product, and the first 120 were awesome. My most recent purchase of 30 has had many sheets that I couldnt cut through with my Glowforge Pro laser.

Great product exactly as described. very fast delivery.