Torkase MR16 LED Driver Transformer, Convert 240 V/AC to 12V/DC, GU5.3 Bi-Pin Connector Included, Max.7W / No Interference with Dab and WiFi, 3-Pack

Great product. Replaced halogen transformers with these no problem at all. Small, compact and easy to install. Tail on MR16 end roughly 90-100mm long, could be longer but still not an issue, just something to be aware of

Highly recommended.I bought 6 (2 packs) and they were easily fitted. The units come with tails on one end and a GU5.3 bi-pin connector at the other end for my MR16 lamps.As such it took 30minutes to swap over my 5 bathroom lights and it was an absolute doddle.Not sure why a previous post suggested the tails were short as they were of a typical length.The cabling on the tails was the appropriate gauge not some flimsy types I've seen elsewhere.There's absolutely no impact on my WiFi signal, and measure tests show no difference between when the lights are off and lighting circuit disabled versus when the lights are on.My baseline was -49db on the first test, then -47db on the second signal strength test, and -48db on the third irrespective of whether the lights were on or off. The WiFi router was located 7metres away on the other side of a brick wall.My old aurora and teclite units are now heading for recycling along with the traditional non-LED MR16 bulbs.

I only just managed to connect once inside the bulb fitting an extra 20mm on the cable length would solve the issue.

They are functional and at a good price, seam to be reliable as had mine for some time now.

I used these drivers to renew the downlighters in my bathroom, they were compact and ideal for where they needed to be positioned. They were delivered ahead of time and at a very reasonable price.

Just tested all three units. Looks working no flickering. Let's hope it's going to hold with lifespan. The only current complain is that cables are short so doesn't leave much space to play around when inserting/ tricky to install with such a short cables... But competitors do the same.. So whatever..

Excellent value, replacing 240/12 V transformers designed for halogen downlighters where output is not pure DC, and so causes flicker on LED bulbs. These are a piece of cake to install, compact and do the job perfectly... recommended.

Easy to connect as these are pre-wired at each end. Units are much smaller than the ones they were replacing, this made fitting easier in a confined space. Cant vouch for reliability but all good so far.