Turbo Intercooler kit Pipe Boot for Ford 6.0L CAC Intercooler Pipe Boot kit 03-07 Tube Powerstroke for Ford F250 F350 F450 F550 (Black)

It was hard to put in it didn’t really fit right

these parts were not for a "build" but to prevent a future failure on the cold air side stock plastic pipe. having to replace the up pipes and deciding it was a good time to replace the oil cooler also - the CAC piping was very accessible -How ever - as some have said -he clamps are junk and not suitable for use on silicone hose, the hot side pipe is not bent correctly , cold side may have been BUT if I used the new boots on the hot side and my old pipe (was an option as it is intact) the remaining boots would not fit the cold side pipe. the pipes are thin , the finish is non durable, almost like a stain instead of a good paint. sadly i will have to use the old plastic cold pipe for now and redo all the work again at a later date. over all a bad way to end the day with junk non-fitting parts.

So far so good. The claps seem a little cheap but I have my old ones just incase. You should take a micro fiber towel and run it through the pipes to make sure no metal shaving are in the pipes. I had some metal shavings in my pipes. All the boots fit fine with no issues. I use brake cleaner to clean the boots and pipes before installing. Time will tell how good these are but until then 5 stars.

Fitment isn't perfect and definitely takes trial and error. Ditched the boots and clamps that came with it. Go with Riff Raff for those instead.

delivery was fast parts exactly as advertised, look really good but the powdercoating knicks very easy, lucky for me not really visible, only complaint is the bolt on the clamp seemed to strip and not hold very easy. other than that very happy with purchase, and waiting to order the matching cold air intake

Exactly what it is

The product doesn’t fit correctly at all the bots pop off repeatedly over not worth your money wish I could get a refund

Thank you, thank you, thank you. If you are looking at this product you are either looking at dressing up under the hood of your 6.0L or fixing yet another design flaw for the Ford 6.0. I was moving from one town to the next 30 miles away. The second load was a 10'x10' steel frame greenhouse on a 12'x6' trailer...so a very light load for my F350. I was just about to top a hill when the Ford rubber coupling blew off. I bought a new Ford coupling, followed instructions 3 times and yet it failed during 3 test runs at less than 20 PSI. So I found these pipes and hauled my 14,000 pound toy hauler and had no failure. The Ford design does not have the flared ends you see on a good design pipe. Again thank you, thank you

Just an FYI, you will need the shorter hose on the top passenger side of the tube. The one that will fit the ambulance engine.

the overall product is great. The clamps supplied with these intercooler pipes don't tighten enough and can pop off at low boost pressures. Purchase some better clamps when you purchase this kit and you will be good to go!