Koroao Metal Wall Mount Holder for Orbi Whole Home Tri-Band Mesh WiFi 6 System/Orbi Ultra(RBK850)(RBK852)(RBK853)/(RBS750)(RBS751)(RBK752)(RBK753)(960/860 Series)/(AX4200)(AX5700)(AX6000)(1-Pack)

I bought this to mount an Orbi satellite in my workshop to go along with a new NETGEAR - Orbi AX3000 Tri-Band WiFi 6 Mesh System (3-Pack). I had already installed the RBR750 router at the modem, and the 2 included RBS350 satellites placed within my home, and had already ordered an additional NETGEAR - Orbi AX4200 Tri-Band Mesh Wi-Fi 6 Satellite to install in my workshop. However, when I inspected the bottoms of the RBS350 satellites, I noted that they are NOT constructed with the embedded nuts in the base. The router, on the other hand, does have the nuts. And the images of the Orbi AX4200 satellite on the store's website did not show the base of the satellite. I spent a lot of time making a plexiglass support stand to adapt to the wall mount for the satellite to be able to install in the workshop (before receiving the additional satellite). Had everything made to fit the wall mount before the new satellite was delivered. Upon receipt and opening the package, I did see that the new Orbi AX4200 Tri-Band Mesh Wi-Fi 6 Satellite had the nuts in the base! Everything did install easily. The satellite is quite steady attached to the mount. Unfortunately, I'd wasted a couple of hours making a holder that I didn't need (which is a good thing). Summarizing, if you are purchasing the Metal Wall Mount Holder for Orbi Whole Home Tri-Band Mesh WiFi 6 System/Orbi Ultra(RBK850)(RBK852)(RBK853)/(RBS750)(RBS751)(RBK752)(RBK753)/(AX4200)(AX5700)(AX6000)(1-Pack), you might want to check that your satellite does have the embedded nuts in the base BEFORE ordering this item. Please note that it does fit the RBR750 router, and it does fit the Orbi AX4200 Tri-Band Mesh Wi-Fi 6 Satellite, but DOES NOT fit the RBS350 satellites, unless you are prepared to make a bracket that fits on the mount to allow the satellite to sit in. If needing to do this, one can pick up a small sheet of thin plexiglass and cut out a piece that fits the base of the satellite, and taking into account making the sides, you can cut out small pieces on 2 corners (in the front), and using a metal straight edge, one can heat the area where you want to bend the plexiglass with a heat gun set to around 700 degrees F (don't heat too much to cause the plexiglass to bubble), and bend the edge up to a 90 degree angle - do this for the front and 2 sides. Overall, a great product, fits the satellite well (the one with the embedded nuts). Highly recommend!

I have the Orbi 970 Black (RBKE963B) and it fits perfectly. The bracket is thick and solid and mounts easily with three screws. The addition of thumbscrews for the router make it easy to attach and remove. The gap underneath allows you to easily feed the cables through and wind them around to maintain a neat look. I also like that the gap between the router and the wall still allows you to get behind there to add cables or pull out the power supply if needed. The official Netgear mount leaves no gap to work in and actually bends the power and ethernet cables, increasing the likelihood of breakage. This one has none of those issues. It’s a fantastic mount.

Works as described, just make sure to use the correct screws for mounting

Wow! These are awesome. They cleaned up the router installs tremendously. I was able to mount them high on the walls with a professional appearance.

Fit my 900 series Orbi's perfectly. Well made out of sturdy steel and the included screws to attach the Orbi are very good quality. A note when shopping for Orbi mounts: the various models look similar but they are not the same foktprint, which I found out the hard way. Be sure the bracket you are purchasing are sized to fit the Orbi series you own. BUT...this one's not available in white, which is the color most Orbi's sold are. Kinda dumb. Easily painted. I used white lacquer for quick dry time but enamel (like Rustoleum) would be more durable. If not for the color I'd give it Five Stars.

Well built. Easy to install. Great for mounting my routers out of the way.

Solid built piece. Great value for the money. It came with extra screws incase I screw one up. The hole aligned perfectly with my orbi device. Would buy again.

We picked up the Orbi Whole Mesh WiFi 6 System from Costco (model RBK753S-100NAS) and I wanted to mount two of the three units. These wall mounts are made from metal and are very sturdy. They come with exactly what is pictured, three screws with those plastic things that help you attach them to sheetrock), and two thumbscrews that you attach the units to the wall mounts with. The untis attached perfectly to the wall mounts, and the fact that they do that with thumbscrews is very convienent if you need to pull one down easily for any reason. Very happy with the quality of these.

Great Quality

Good quality mounts for ORBI RBR750 AX4200. I had an electrician install a outlet and RJ45 drop, near the top of the wall. The mount is metal, very stiff, wont bend easily and keeps the router off the wall about 2 inches. The holes for the mount lined up perfectly. Recommended for sure.

Wanted to mount orbi satellites and reduce the clutter. This works well and very happy with the quality.

I have this in the garage holding up my outdoor orbi and I do not have any problems with it at all. It's secure and well made.

Great product