📈 Elevate your screen game with IQ Shield!
The IQShield Screen Protector for Samsung Galaxy S20 Ultra offers a 3-pack of anti-bubble, clear TPU film designed for easy installation and maximum durability. With a case-friendly design and a lifetime replacement warranty, it ensures your device remains protected without compromising on clarity or responsiveness.
D**N
Good choice screen protector
Great quality and pretty easy to install if you take your time. No issues after installation but if you do thier support will send you a replacement in conclusion it's a good purchase no complaints.
A**R
Fingerprint Unlock Works Perfectly!
After trying several screen protectors that did not work, I was thrilled when this one worked perfectly. Fairly easy to install, fingerprint unlock works great, touch screen still responds without issue. Highly recommend.
R**.
Excellent product that lasts a long time
This is great screen protector. I have had the same one on my phone for the last four years. Aside from some bubbling at the side due to my error during installation, it doesn't show major signs of damage. I have had no issues with swiping or any other function on my phone screen. I cannot comment on the fingerprint reader because I don't use that functionality on my phone.
J**N
Best Value Protector Hands Down
I'm loyal now. I've only had good experiences with this brand. If you are paying more than $10 for a plastic film screen protector...I question your judgment. IQ Shield all the way.I have had zero issues with the fingerprint reader. I never had to re-do my fingerprints, and never adjusted the sensitivity; It's working exactly the same pre- and post-installation.Doing a wet installation may seem daunting, but I can't even imagine going back to the days of one-shot attempts where if you don't get it right away you've wasted an entire protector. This is such a relief to place it on the phone and still have a moment to readjust. Don't fret if it doesn't look perfect right away. As the instructions say, any micro-bubbles and rainbow coloring disappears. For me it was about 24 hours later. Just have faith. It was like magic, and now the film is super sleek and you couldn't even tell it was there unless you looked at the camera cutout.PLEASE MAKE SURE YOUR FINGERTIPS ARE WET IF YOU HAVE TO TOUCH THE UNDERSIDE OF THE PROTECTOR!! I freaked out during my installation because I saw fingerprints trapped on the wrong side. I was able to peel off the corner of the protector where this was, wipe it away with some water, and reapply it. Thankfully, it's come out absolutely fine and even the littlest smudges from that episode disappeared in those first 24 hours. Overall: installation isn't foolproof, but it sure is a hell of a lot better than alternatives, and the instructions are clear as day. Watch their videos for help.If you don't have the protector lined up millimeter perfect, some cases may still end up peeling the curved edges up. I've had to take off my case on a couple of occasions to re-stick the sides down, but it's a rare occurrence from the first few days after installing and hasn't been a problem since.LAST POINT TO MAKE: S-pen use. Bear in mind, this is a plastic film, not tempered glass. Please understand the S-pen will never work flawlessly with any plastic protector, and this one is no different. If you are a heavy S-pen user you may need to consider tempered glass.HOWEVER, the self-healing property of this protector does helps the issue somewhat. Looking at the phone straight on after using the S-pen (with the screen off), marks are very hard to see. But angle the phone and shine the light differently, and you'll absolutely see circles and lines from where you used the S-pen to write and draw. To be clear: you will only see these marks when the screen is off, and it NEVER impairs the quality of the display when the screen is on. A quick rub of the screen with the heel of my palm usually was enough to buff it out. But I repeat: if this is something that is going to bother you, either don't use the s-pen as much or buy tempered glass.
R**R
Finally a Screen Protector for the Galaxy S8 Plus that works with Cases!
Let me start by saying that I’m literally clumsy, I have never had a phone that didn’t suffer an epic fall nor scratches and/or cracks and so having a screen protector is an absolutely must have on my lists. Initially, I opted for tempered glass but I didn’t like the clicking/tapping sounds I have whenever I typed or browsed through my phone screen and so I figured, I’ll try a different type of screen protector this time. I decided to purchase the wet install types of screen protector for obvious reason, it provides full coverage and it’s really forgiving. Mind you, I absolutely suck at installing these types of screen protectors. Therefore, I ended up buying IQ Shield LiquidSkin Galaxy S8 Plus, which comes in two packs because I figured I was going to screw my first attempt. I actually assumed at that time that I purchased IQ Shield I was throwing money in the water, I’ve been down this path before. I put off installing it when it arrived because I wasn’t looking forward to a headache I was sure would come along with installation. After reading the directions thoroughly and watching the video on IQ Shield’s website I decided to go ahead and give it a try. My first attempt did fail because of alignment. This screen protector is precisely cut and I had it slightly off. I was relieved that you really can pull it back off and make a second attempt (as the instructions clearly state). My second attempt was perfect (alignment wise). ZERO bubbles. Now, this S8 Plus has really amazing great curves and that means the screen protector needs to be work on the curved edges. The screen protector just won’t cooperate that easily. It acted like it wanted to lay down but would quickly pop up back. After a few tries, I decided to use the hairdryer technique as suggested by IQShield and a couple of other experienced reviewers here on Amazon. After a few minutes, (set the hairdryer to lowest setting) the edges laid down nicely over the curves and stayed in place! Use your fingers to coax it down, not the squeegee they provide. It took me a total of about 15-20 minutes to accomplish all of this, of course, your time may vary, I felt I was being somewhat overly careful. They advertise that this screen protector is "case friendly", and I found that to be absolutely true when I put my phone into the Otterbox Defender Case series case 8 hours later. They say you should wait 12 hours, but I could easily tell that this screen protector was not going to come off without some effort (or foolish act). The Otterbox Defender case fits the Galaxy Edge phone extremely tight, but the IQShield LiquidSkin screen protector didn't budge and didn't lift off the curved edges at all when I installed the phone in its case. Perfect! I now have a fully protected phone! I highly recommend IQShield Liquid Skin screen protector, not just for the relative ease of installation but for the looks, feel, and quality of protection it gives. For, all would be or those who haven’t tried it yet here’s an Installation Video guide for you. Hope this helps.
L**A
Buen producto
Es de buena calidad.
C**N
Simplemente lo mejor
Tengo ya varios años utilizando estas mucas y la verdad , estoy super contento con el producto, primero la forma de instalar facilisima y es imposible te queden burbujas, después la durabilidad es enorme comparada con otros del mismo tipo, no se rayan tan fácil y te dan una seguridad para tu equipo, definitivamente lo mejor en micas para tus dispositivos, ampliamente recomendadas
J**E
Really nice protector
Really good quality I love it however, I have to admit; the installation took me like 2 hours as these things take a lot of precision to line up perfectly and stay put. Also the left bottom corner is peeling a bit but with the screen on its not really noticeable.The adhesion is great and you can reapply this thing over and over during installation and it stays sticky.The peeling on the other hand is mostly the design of the phone (s8 edge) and the case I have for it (spigen).So it's not really the protectors fault and you can prevent the peeling if you line the protector up perfectly until it has the tiniest bit of space between it and the case edges.That said the only thing I think this screen protector could use is some kind of device with it to make installation easier and more accurate.One last thing is you need to make sure there is no lint on your screen whatsoever because if there is and you put the screen protector on the lint will be stuck to the protector and it sounds like common sense however the lint can be very hard to see on your screen whilst turned off so, just something to keep in mind.
H**.
Absolute Garbage - avoid like the plague
More bubbles than a Bubble machine.Doesn't apply properly, protector slides off.Even the website they say to visit to view the installation video is not even reachable.Garbage, 0 out of 10.The other reviews I imagine are just shilled or payed for.
S**R
Works
Good product, works well
Trustpilot
1 week ago
5 days ago