E BAVITE Neodymium Cup Magnets, Rare Earth Magnets with Heavy Duty, Hold up to 110 Lbs, Round Base Cup Magnet with Countersunk Hole and Stainless Screws for Kitchen, Craft, Office – Pack of 8

I bought these as replacements for my inventory. I always keep magnets with screw mounts on hand. I use magnets for many different things. Holding fences on wood working tools and drill presses, holding adjustment and cutter removal tools right on the equipment when not in use. All of these uses need super strong magnets that don't let go and these fit the bill.

Item as described, reasonably priced, really strong magnets but I don't know if it will hold 95 pounds, maybe if the objects surface it's holding is flat and true. It easily holds most hand tools with irregular surface, and using 2 magnets makes it more secure. It is MADE in CHINA, I try to buy made in USA products but just like many other stuff availability is limited, overall I am satisfied with the product.

That all still work, but 2 magnets were broken inside the cups

I have a hard time deciding on whether to give this 4 stars or 5. Let me explain...I am retired and have a small shop for tinkering. I like to keep certain tools very handy and have often employed glueing magnets to the side of the workbench so that I can grab them quickly and easily. The problem has always been that the pull of the magnet is stronger than the grip of the glue, so the magnets often come off of the bench. WoodWorkersWeb suggested putting masking tape on the magnet to slightly decrease the grip of the magnet with the tool. This has helped some, but I have always wished that someone would just make the magnets available with a drilled hole inside so that I could attach them with a screw.Finally, someone did.The only real downside that would make me consider dropping the rating from 5 stars to 4 stars is the screw that comes with the magnets is very small and I would like a larger screw for a stronger attachment into the wood. The recess that is milled into the magnet for the screw head is too small for a size 8 screw to be substituted, so if you want to switch to a larger screw, you will need to grind down the head of the screw to accommodate the recess. That is doable, but it sure would be nicer if they had just milled the recess a little bit larger.

Be careful what you stick them to. I stuck one to the washing machine and bare got it off.

The magnets do have a lot of adhesion and are difficult to remove once they've been placed onto a ferrous surface. However once they are tightened down with a flathead screw the magnet parts cracks. So if you need to tighten them down enough that the device to which they are attached will not rotate then I don't recommend them. If that's not an issue for you then they're fine. Personally in my particular case I needed to make sure that the item would not rotate and so in order to do that I had to tighten them down pretty tight and that causes the magnet itself to crack into three pieces. Now the good news is those three pieces continue to stick to the steel frame and so it's more of a cosmetic issue than anything however they do crack so beware

FIXED LOCATION... pre-drilled with or without the holding "cup". JB weld also does a nice job on no hole version...BUT Screw mounts can be moved.PRE DRILL HOLES DO NOT USE IMPACT to drive the screws.For best strength use same shape Neo to what ever you are attaching to. EXAMPLE: Over door shoe hangers I use for nearly everything FOR SHOP OR CAMPING. I sew the 60 X 10 x 5 mm into a lining on the top edge, properly spaced to match the FIXED units.That then those attach to the HARD fixed "cup" version (60 x 10 x 5mm) that is mounted where I need to hang the storage hanger. WOw!

Quality built, super strong!

This is a repeat purchase for me. The magnets are very strong. I'm using one to hold a swing gate, and after 6 months in the rain the chromed steel outer case still hasn't rusted. Need to be careful not to over-tighten the screw, otherwise the magnet can crack as this model is relatively thin in profile

I couldn't separate the magnet without sliding . Nice quality