ARCTICTP-2 (APT2560): Economic Thermal Pad, 120 x 20 x 1.0 mm (1 Piece) - Thermal pad, Excellent Heat Conduction, Low Hardness, Ideal Gap Filler, Easy Installation, Safe handling - Blue

Had to double up on these when replacing the cooler on an aging Titan X (cause I'm dumb and miscalculated the thickness I needed) but even when doubling them up performance was great.

I'm not sure this specific version of the product would be the best choice for a PC's processor. But for the Raspberry Pi, it solves so many problems. I'm using an aluminum-finned radiator with hollow, oil-filled copper tubing, which runs through an aluminum heat-sink base. Pretty standard stuff, for the Pi 4B. The copper tubing happens to run directly over the ram. Unfortunately there is quite a gap between the two (1/16"). And, thermal pastes being (generally) non-adhesive; I didn't really want to mound up a glob of it...cause I really doubt it would retain it's shape for long. This pad, however, will hold it's shape indefinitely! I cut one piece to perfectly cover the RAM, a piece which bridges the CPU and the RAM, and even a narrow wedge-like piece to fit into the gap between the copper tubes. There is so much thermal contact with the heat-sink, I can be sure that I'm getting the full potential out of this cooling device. And the fact that it's non-conductive is very reassuring! The same can't be said for all thermal pastes on the market... This product is very versatile! It cuts easily, with an exacto or utility knife, or even scissors. It's not sticky, like glue is... But it can be made to stick, a bit, by simply pressing it into place. I'd say, if you work at all with electronics or computer repair/assembly, you can't go wrong having at least one pack of this on-hand. You'll find a use for it, I'm sure. And probably when you're in a bind, and nothing else will do.

Took the pad out of the wrap and it crumbled on ends like it was very dry or something.

These Thermal Pads are soft vs other type pads, are not sticky, or difficult to work with.

If you plan on using for the PS4 you will have to get 8 pieces cut about 10mmx10mm to cover the chips. If you want you can also cover the bottom side of the chips as well. Will need to plan out the cuts/pieces you need. the size 120 x 20 x 1.0 mm (1 Piece) will work just fine just ensure the chips are covered and not overlapping. Simple install opening up the ps4 just a pain. So do it right and worth while, new fan, pads and thermal paste. Seal it up and be done with it.

Bought a couple of this for my 2080. Idle temp is now 28c. Very happy with the purchase!

I was scared to buy this. I did bought it. I need it for my ASUS ROG Strix GeForce GTX 980 Ti. I opened video graphic card. I cleaned them up. I removed old thermal pad and old thermal compound paste. I put new thermal pad on it. I put new Noctua NT thermal compound paste on the GPU. After done, It works. I have no problem with it. My video graphic card still is strong. Yeah I turned HIGHEST! No problem. No overheat or crash or anything happen since MAY 22, 2020 till now. NONE! I love this new thermal pad. Thank you!

muy buena calidad excelente vendedor y producto

How you like to meet you stay clear that's when I got mine and appeared to be all dried out and crumbly when I went to use it as another person mentioned... the only thing I can liken it to as a dried out piece of gum.

Die Pads lassen sich leicht verarbeiten und sind relativ formstabil. Über die Wärmeleitfähigkeit kann ich mich auch nicht beklagen, ist nicht schlechter als die original Pads auf einer KFA² RTX 3070.

Good quality product, but damn the pad sheet is extremely small to price ratio. Used it for my PS4, and didn't have any left. I won't be buying again for sure. It's expensive because of brand name. Next time I'll purchase an equivalent quality for a cheaper price. Perhaps get more for the money as well. Just a heads up to anybody that buys this.

Excelentes para disminuir el ruido del ventilador y evitar que se calentara mucho mi ps4. Antes no prendía por tan caliente que se hacía. Ahora prende sin apagarse y el ventilador no hace casi nd de ruido. Cabe destacar que agregué también pasta térmica de la misma marca.

Costano un po ma tengono a le temperature delle vram della mia 2080ti, le ggdr6 possono diventare molto calde. ho utilizzato questi thermal pad anche sul mio MacBook Air 2020 intel posizionati sull'heatsink riscontrando una diminuzione di 10 gradi quando lo uso per le videoconferenze meet , eliminando in questo modo il fastidioso rumore della sua ventola, tuttavia c'e da considerare che il calore si riversa tutto sulla scocca esterna in alluminio che diventa abbastanza calda, lo consiglio se in genere utilizzate il laptop su una scrivania