OBD2 to OBD1 GM Adapter,OBD1 12 Pins to OBD2 16 Pins Diagnostic Tool Connector Adapter Cable Replacement for GM

The OBD1 cord is very nice made strong connectors are really nice but I realized after I ordered it that my OBD2 scanner will not pick up OBD1 off my 92 Chevy pickup truck it's either the wrong type of pens I have a OBD2 Scanner with 9 pins in it and it does not have 12 and the OBD1 adapter has 16 on it and then I read on YouTube that my scanner will not pick up any codes off of my 92 GMT OBD 1 cord will not work on my machine so it's a fine product it just doesn't work on my scanner thank you very much

It’s the right part for sure, but it doesn’t work.. at all.. almost as tho it’s not getting power. I’ve looked over everything and chased wires and this thing is now a paper weight

I bought this hoping I could cut off the 16 pin end and keep the 12 pin ALDL end and wires for use on 1980's GM Ponitic Fieros that use 160 Baud ALDL on pin E and Diag Select on pin B.It turns out that those two pins are not wired (by design) so this cable is not suited for Fieros ECMs that use 160 Baud. This cable will work on some 8192 Baud ECMs.This cable is wired as follows (note: your signal names may vary) :Signal: 12 pin end - 16 pin endGND: A - 4 & 5FUEL PUMP: G - 168192_BAUD_DATA: K & M - 7No other pins are wired.The seller had good communications. I decided to cut open the 12 pin connector and wire it for my needs, so I ended up keeping this cable.I gave the seller 5 stars. This was not seller's fault but listing in the ad which the pins are connected will help others.Note to Seller: You may want to add the pins connected as I mentioned above to your description.

This product is what it claims to be and does the job it is supposed to do. It had no functional defects and allowed the connections needed to use the equipment.

Does not work on 95 chevy suburban. Will not power my scanner on

Good quality

Cable is good quality and connector fit perfectly to OBD1 connection port (on my 86 olds) and my ANCEL AD310 OBD2 code reader. However, my OBD2 code reader remained dead. No single to LED display screen. Vehicle battery voltage was 12VDC; tried inspecting and reconnecting three times. Also gave it five minutes for it to make a connection; in case time was a factor. Same results. Checked my code reader on a 1989 GMC truck, and it worked fine. Nice cable, but doesn't work for me, and I have no idea why?

Made job easy

tres bon

Does not work with Autel or Blue Driver. Don't buy

It fit to my Eldorado 1993 i m very satisfied

Tried on 3 vehicles and this does not even power up the scanner, looks very cheap

Neither one works