EZDIY-FAB RGB GPU Holder 5V 3-Pin Colorful RGB Graphics Card GPU Support Video Card Holder Bracket, Video Card Sag Holder/Holster Bracket- 309-1

While the lights aren't quite as diffuse as some of the pictures show as mentioned by others, the bright spots aren't terrible and the overall function is wonderful. I mostly got this to fill in the dark void between my video card and power supply as my case already has a very nice GPU support, and it works wonderfully in that role. It definitely feels sturdy enough to support a GPU with all three thumbscrews snugged down. As soon as the system came on it synced with the fans and other lighting and looks great, really ties an argb buld together if you don't have an rgb video card. I'd definitely recommend this to anyone looking to add a bit more flair to their build for a very reasonable price.

The media could not be loaded. Works well with softwares, easy to install, RGB looks great, supports the GPU well, affordable. Highly recommend.

So I just received and installed this GPU bracket along the 5v-12v converter box by the same maker. I installed this on my Asus B450-F Gaming motherboard and to my pleasant surprise, it synced up automatically with my Armory rgb software without even having to hold the sync mode button. So that was nice. The build quality is also good. It is very sturdy. Not flimsy at all. The little black bracket that supports the GPU is made of metal, which is nice. The A-RGB lights are bright and colorful. It does provide support to my slightly sagging GTX GPU, which was really an eye sore for my OCD.Everything now looks perfectly perpendicular thanks to this bracket. :)Here's my problem...The screws they provided are in my humble opinion, one "mm" too short, or perhaps I can also say that grooves on the bracket they go in, are a bit too narrow for the middle part of the screw stems, to sit perfectly flush within.So a solution can be made if one or the other is modified. Either make the screws 1mm longer or drill the grooves just a tiny bit wider, so that middle part of the screw can actually fit in it, leaving only the top part of the screw exposed, rather than the top and middle section exposed.As it is, once you attach the little black support lift and the rectangular washer in place, the screw just barely makes contact with all the pieces. I worried it I would strip the grooves if I tightened it too much (and for a heavy GPU, you want to make sure the bracket doesn't slide back down over time).Also, because the grooves aren't wide enough to allow the screw's middle sections to sit flush inside of them, you may actually chip the surface of the clear acrylic around them. To circumvent this, I actually attached the screws from behind the bracket instead of the front region and sat the rectangular washer in front of the bracket where the screws would normally sit. It works just as fine and prevents any circular scratching from the short screws.I hope EZ reads this and takes it into account. Its a simple solution to make the screws 1mm longer or drill the grooves to be just wide enough for the middle part of the screw to sit nice and flush on the bracket. :)Other than that, this thing would get a perfect 5 star rating for me.The good news is, you can work around it and even go online and look for longer screws of the same diameter that you can use with it.The bracket was a little tricky to install. Took a few tries until I felt the small support piece was just the right height to push up my sagging GPU. But not too painful. It took less than 10 minutes to set it all up. I can see some struggling to get it right. My advice is to first prop your GPU up with something (can be anything) and then attache the holder, so it's perfectly leveled.This company also seems to really care about their products and I can see them being much more popular in the coming years if they keep this up. The packaging for these items were excellent and all required pieces were included.Excellent work. (aside from the screw thing ;)

I like the way how this turned out to be, the bracket does hold the GPU decently but I mostly bought for the aesthetic look since the GPU is not too heavy. The color does pop out pretty well and easy to adjust. The quality is pretty good id say and the bracket does align with my GPU properly, doesn’t touch the fans from the GPU which I was worried at first but it’s all good. I would definitely recommend it for the aesthetic or for the people who use heavy GPUs on their gaming pcs.

The media could not be loaded. UPDATE 07-16-2020I found out what was causing the issue! the placement of where I had the holding arm was obstructing one of the GPU's Fan, which was causing the higher temps. I apologize for the lack of investigation before my review but I will leave it for context. Great Product so far and hopefully my mistakes could help someone having a similar issue.UPDATE 07-12-2020The GPU Holder was causing my GPU Thermals to go up by 12 to 13 degrees Celsius. I am unsure as to why but I have removed it from my rig. Thermals are back to normal. Since Amazon only let's me upload one video I have attached extra images of the results after removing it. Also if I am doing something wrong which explains the high thermals please let me know because I have the look. Thank you.ORIGINAL POSTHello, so I would have to say that it was really easy to install. I didn't have much issues there. The one thing I was a bit bummed about was that the wire was kind of short so I couldn't run it through the back; I had to run it over the MoBo. I'm hoping it doesn't have any issues with RGBs dying, which I've read on some of the reviews. Great overall, if I have any issues I will update my reviews.Pros:-Easy to Install-Color Range for RGB-looks greatCons:-short connection wire-Highers GPU Thermal 07-12-2020If there are any changes I will update these lists.

I don't know what people are talking about. The install is as easy as installing a graphics card only you mount it right under the card using the same screws provided by your case manufacturer you pulled out and used on your gpu. Also I don't know what is going on but if your bracket holder has auto in its description then icue, armory crate, msi center...etc. will not control the lighting because the bracket was made to automatically control its own lighting. Therefore you have no control over it. Other than that this thing does its job. Which for me is to hold up the 3080ti I installed in my daughter's pc. She loves the look and I think it was well worth it for the cost.