Marine Grade White PTEF Lubricant - Ultimate Protection for Winches, Windlasses, Turn Buckles, Blocks, Pumps, Shafts, Zippers, Heads & More - 3.7 Oz (85504)

GREAT FOR OUTDOOR HOSE FITTINGS

I took a bare carbon steel gun part, slathered it in a thin film of this grease, made sure every millimeter was covered and gently set it down.................. into a 30% bleach solution overnight! Trollolololol The part survived without a speck of pitting! Yay! Good luck getting this grease off, though, because the only shiaht that can hurt PTFE, in short order, would destroy a polished steel surface, in seconds. Don't bother with a dry rag, unless you plan to dispose of it, because the grease will NEVER completely come off of that rag. I rinsed off as much as I could, in boiling soapy water, but I could still feel the steel was a touch slick. So I used a poor rag and scrubbed it to death! Lol This is THE stuff to lube -40°F to +400°F moving parts, if salt and other corrosive contact is imminent.

good synthetic grease

just what i was looking for

I have used this for many years on a boat. Coating everything from screws to impellers and head pump parts. Finally needed to get another. Amazon is great for having almost everything one needs.

Been using this product for many years on our boats

TEF-GEL IS SUPER EXPENSIVE. SO INSTEAD I BOUGHT THIS. NO WHERE AS STICKY AS TEF-GEL, BUT WILL WORK.

Great general purpose lubrication. Also using it on my boat covers snaps and zippers.