Mount-It! Triple Monitor Mount | Desk Stand with USB and Audio Ports | 3 Counter-Balanced Gas Spring Height Adjustable Arms for Three 24 27 30 32 Inch VESA Screens | C-Clamp and Grommet Bases Included

While it holds the screens sufficiently well, this will NOT support 3 29" wide-screens without overlap. Fitted in the corner of a corner desk, it is impossible to position the screens without the centre screen being placed behind those on the left and right, meaning that you cannot properly see the edges of the centre monitor.Very disappointing

Pros: Does just what it advertises. It is heavy and sturdy, and the shock loaded arms are very capable of holding a monitor. Installation wasn't quick and simple, but it was straightforward none the less.One of my monitors didn't have VESA mounts, more a problem with the monitor than this product. But I simply attached the VESA plate to the back of the monitor with Gorilla heavy duty mounting tape. 3 days later it is still hanging on strong.Cons: The product is designed to be clamped to the edge of a desk or to bolt through the top. My desk does not have an edge as the back is flush, and I don't want to drill the top. A 3rd mounting option is possible with the 90 degree base plate: bolt through the back where the clamp would mount. This product doesn't include bolts for this option so I had to go buy some. A minor inconvenience, but the product designers could put more effort into realizing this option.The VESA plates only accomodate 100x100 or 75x75 vesa mount patterns, and my 32", which it says the stand would carry, has 100x200 mount patterns. I had to order an adaptor separately, a minor inconvenience. It would be nice if adaptors were included or if at least one of the plates would accomodate larger patterns.The center mount is stationary, with height adjustable only with a lever that is well behind the monitor and awkward to reach, while the left and right monitors can be adjusted vertically with a light touch. It would be nice if the center monitor had this ease of height adjustment.The product advertises it will hold 32" displays. I have a 32" center, a 24" left and a 22" right. The arms supporting the left and right moniter are close to fully extended, so it seems unlikely that this will support 3x 32" monitors without some serious limitations.Overalll: For what I need this will do just fine. It is much better than having monitors stacked on amazon boxes and PC towers, and easier to adjust the height between standing and sitting. Just a few minor considerations from the designers of this product would improve it.

El mejor soporte que pude haber encontrado...- Vale muchísimo la pena cada centavo que me costó...- Materiales de la más alta calidad...Todos los que entran a mi oficina, se quedan con la boca abierta al ver mi soporte triple...Todos se quedan maravillados con el soporte y siempre me preguntan que en donde lo compre???Ya hasta estoy pensando en comprar algunos y para cuando me pregunten que en donde lo compre, contestarles:¡Yo los vendo!En verdad esta excelente este soporte, no duden en comprarlo!!!

It comes in pieces. If you dont have experience assembling products, do not purchase.The cable management it very helpful, but also very fragile. Only use flimsy cables for your monitors with this. My heavy braided and meshed cable is not too flexible, and was a pain to run through the management system.Cable management system takes approximately 5 feet off of your monitor cables closest to your PC. Make sure to use a longer cable for display, and a power bar attached to the bottom of your desk for your display plugs. (I had to buy extension cords just to use some of my accessories and one of my monitors)Monitors always pull down on a slant, no matter how you orient them. Likely due to the monitor attachment system.All in all, the problems with it are minute compared to the aesthetic of the arm, and the QoL improvements of my set up. Thoroughly enjoy the floating monitors.The pneumatic balancing arms are fun to work with, but i find no purpose for the adjustable gauge, as I need it cranked to max for my monitors to stay where I need them.

Pros:- The mount was very easy to install with clear instructions.- The mount arms are very sturdy- Plenty of cable management solutions built in the arms and baseCons:- USB cable doesn't support version 3.0 speeds. Can only be used as a USB 2.0. I was hoping to use this cable to extend my triple monitor docking station which uses USB 3.0. Now I'm stuck having to use the stock 1 foot cable that came with the docking station... Had I know about this, I would've taken the version without any USB connection and save myself 30$...- The Vesa mounts are the type that clips to the Arm. Once clipped, the mount itself is wobbly and doesn't fit in snuggly.- No option for all black color design.