HDBUBALUS Chrome Visor Style Turn Signal Trim Ring Cover Auxiliary Light Passing Lamp Bezel Fit for Harley Touring Electra Glide Road King Softail

Solidly made and nice chrome.Fit is excellent. I installed the chrome trim ring onto my factory front and rear turn signal lenses of my 2008 Harley Electra-glide Ultra Classic touring bike. The order of assembly steps is important. First ring will take 5 minutes. Second ring will take two minutes.1. Clean and dry everything first.2. You WILL drop the screws, so assemble over a table or tray.3. Put bike screws into your lens, you will not be able to insert bike screws in the lens AFTER you snap the lens into the chrome ring.4. REMOVE THE CHROME RING'S LONG SCREW AND BARREL NUT and set it aside.5. Align the bike screws and lens to match the bike's screw hole pattern.6. Using two hands, hold the chrome ring against your chest, with the opening gap away from your chest, like you would hold a horse shoe horn in each hand.7. Pull the ring open slightly and snap the lens into the chrome ring from the back of the ring, being careful to keep the lens screws oriented vertically, or horizontilly like your bike's screw hole pattern.8. To mount the assembly to the bike, you MUST use a long slender screw driver of medium size so you will not strip the screw or damage the chrome ring.9. Mount the assembled lens/ring assembly on the bike using the bike screws and tighten the bike screws.10. Lastly, re-install the chrome ring's long screw and barrel nut. Tighten until the gap in the ring closes completely.11. Enjoy the new look of your bike.

Just in case anyone else is curious, these do fit both front and rear. They are easy to install, fit well and look good on the bike. Great value, too.

Very good metal material not cheap and flimsy. The nuts and bolts are also stainless steel for no rusting. I couldn’t be happier and they look great.

Perfect fit on my 2013 roadking the visor bezel tr fit in the front and rear

Installed these with red covers in the front, love the look of it. The black covers were too dark & I was worried they couldn’t be seen.. now, it stands out. Easy install. 15 minutes max. Blends the turn signal covers in well with the bike with these trim add ons.

I recently noticed my right side rear turn signal trim ring and red lens on my HD Electra Glide was gone. It had been there since 2009, 16 years! Anyway, HD wanted $50.00 for a pair and these HDBUBULUS(good grief) were only $25 for a pair as best I can recall. Quality appears just as good(better?) as HD. Not easy to install because you have to dink around with getting the ring around the lens, etc., but no worse than original HD trim rings. Suggest you use blue Loctite on lens and ring screws to avoid your rings and lenses loosening over time and flying off into the ozone or side road ditch. Ride On! :)

won’t fit good want to tighten the other one up in the screw went right through the hole

Exactly what I ordered. Delivery was perfect. All I need is Amazon!