H500P Mesh White

This case is a pleasure to build in, airflow is superb, and it really allows you to show of your hardware

Working...

Excellent product

الحجم و التبريد و الكيبل مانجمنت ما عليه كلام 👍🏻

Good case easy to build in blocks noise very well but i didnt recive coolermaster controller

the case was missing the accessories (screws, rgp controler …etc)

فنان

افضل كيس من ناحية الجودة و الرحابة و تدفق الهواء

Coming from a Silverstone FT02, the MC H500 is not in the same quality range and this is also reflected with the price. I was shopping for a new case because I found out that my new EVGA RTX 3080 FTW3 didn't like to be installed vertically (10C higher temperature). So, I began to look for a case that uses large fans because I was using 180mm fans since 2009 and really liked them. Stumble across this H500 case with a mesh front, looked at it and thought that my new AP183 fans would fit. Upon receiving the case and without testing the original fans 200mm, I proceed to cut out the front and installed my AP183 fans. It must be noted that doing so erase any possibilities of using 120/140mm fans in the future. With the AP183 installed, the case performs beautifully in the noise and the cooling department. The bottom 180mm fan is also perfectly aligned to feed fresh air to the GPU, which is not the case with the new Fractal Torrent case, for example. Also, with the use of the AP183 (and their special airflow pattern), at medium speed (around 800rpm), you can feel fresh air going to the last fan of the GPU. You also don't feel any hot air coming from the GPU and recirculating back into it. Point to be noted, the GPU temperatures are better (around 2-3C) without the PSU shroud. Finally, I really like how this case/project turned out, some work was needed, but it now performs beautifully. I hope that my review can help some that are hesitant and would like to use their beloved 180mm fans.

Ich war für meinen neuen PC auf der Suche nach einem Gehäuse das ordentlich Platz bietet, ohne dabei zu protzig zu wirken. Viele Gehäuse versuchen mehr zu sein als sie sind und lassen einen das auch am Preis spüren. 200€ fand ich für ein Gehäuse dieser Grösse und Ausstattung allerdings vollkommen angemessen. Es kam wesentlich früher als angekündigt was mich natürlich gefreut hat. Beim auspacken merkt man direkt, dass man sich Gedanken gemacht hat; wer schon mal alleine ein Gehäuse aus dem Karton geholt hat, weiss wie schwer das sein kann. Besonders dann, wenn das Gehäuse so viel wiegt wie das Cooler Master H500M. Als Lösung wurde das Gehäuse samt Umverpackung in eine Tasche gesteckt, so dass man es auch alleine wunderbar einfach aus dem Karton holen kann. Das Gehäuse selbst ist wirklich massig und durch die rundum-Verglasung sieht es extrem edel aus. Das Frontpanel bietet mehr als genug Anschlussmöglichkeiten und wirkt wie der Rest sehr hochwertig. Das Innenleben ist gut durchdacht: die Kanäle bieten genug Platz für alle nötigen Kabel und dank der abnehmbaren Blenden sieht sogar die Rückseite wirklich ansprechend aus, was meiner Erfahrung nach recht ungewöhnlich ist. An einer dieser Blenden wurde der RGB-Controller angebracht. Die Lüfter sind bereits damit verbunden und man muss man das ganze nur an Mainboard und Netzteil anschliessen. Die Farben der Lüfter können dann über einen kleinen Knopf am Frontpanel durchgeschaltet werden, dafür verzichtet das Gehäuse standardmässig auf einen Resetbutton. Wenn man ein Board mit entsprechender RGB-Unterstützung (z.B. Asus Aura) verbaut hat, kann man den Schalter aber auch einfach ans Mainboard anschliessen um einen Resetbutton daraus zu machen. Wie in der Beschreibung zu lesen ist, hat man die Wahl zwischen zwei Fronten: gehärtetes Glas oder einem Mesh. Was nicht in der Beschreibung steht, ist dass das Mesh noch ein zweites, kleineres Gitter im innern hat, was möglicher Weise als Staubfilter fungieren könnte. Ob das wirklich was bringt, kann ich aktuell noch nicht sagen. Ich hab mir zur Vorsicht noch extra Staubfilter dazu bestellt. Ich habe weder eine Wasserkühlung, noch zusätzliche Lüfter verbaut. Trotzdem reicht der Luftstrom der beiden 200mm Lüfter aus, um meine Hardware (Ryzen 7 3800x, RTX 2070 Super, NVME M.2 ohne eigene Kühlung) auch unter Vollast kühl zu halten. Eigentlich hätte ich noch einen Stern abziehen müssen, da der Anschluss der Audiobuchsen bei mir ein loses Kabel hat und dementsprechend nicht funktioniert. Ich habe nicht vor die Buchsen zu nutzen und weiss mit Sicherheit, dass das Gehäuse ohne Probleme ausgetauscht worden wäre, ich wollte aber nicht noch länger mit dem Zusammenbau warten müssen. Ich bin vollends begeistert und würde das Gehäuse uneingeschränkt empfehlen.

بعد سنة من الاستخدام اقدر اقول انه افضل كيس ممكن تاخذه صحيح السعر عالي بس المميزات الي فيها وحجمه الي يدعم كل القطع يخليك ماتستخسر فيه عيبه مافيه خيارات كثيرة لاماكن الامراوح محدودة جدًا

Excelente producto. Llegó en óptimas condiciones y antes del tiempo estimado. Es excelente en calidad precio, con una ventilación bastante buena y bastante espacioso

This case was released this year and I pre-ordered the case here on Amazon due to wanting a small portable mini-ITX machine. Yes this is a limited field and a lot of the cases have been out for awhile and have had no major updating. While I was looking at this case there were many things that I liked about it and some that I was unsure about. After watching several YouTube reviews I really started doubting my choice in purchasing this case, I even tried to cancel at the last minute but it was too late. So it was delivered today (08/21/2019) and I decided to give it a shot and see how it does. So first impressions is that it is smaller then I thought it would be since many reviewers considered this case big and bulky. They also stated that it felt cheap and not well built. However in my experience this case felt very solid and well built and was smaller then I imagined (it really is hard to tell on videos). So I started my build and here are the specs: Case: Cooler Master H100 CPU: Ryzen 5 2600X CPU Cooler: Noctua NH-L9a AM4 Low Profile Cooler MOBO: ASUS ROG STRIX B450-I Gaming Motherboard GPU: PNY GeForce GTX 1660 XLR8 OC Single Fan RAM: Corsair Vengeance LPX 16GB DDR4 DRAM 3200 Kit - Black SDD: (1) Intel SSD 660p Series 1TB M.2 Drive and (1) WD Black 500 GB M.2 Drive as boot drive I assembled the MOBO outside of the case to include the CPU, CPU Cooler, both M.2 Drive and RAM. This was extremely easy and didn't take much time to do, I have built multiple gaming PCs in the past. If this is your first time it will take a little longer but isn't difficult at all. Next I secured the assembled MOBO in the case and connected the from connectors and the fan and RGB cable to the MOBO, I did not have to use the included RGB control since my MOBO supported the RGB fan. I did you the included cable from ASUS for the front connectors and it made it very easy and fast! At this point I started my cable management, this case requires you to take time and find good locations to secure the cable to so that they are not blocking the main fan and are out of the way of your other cables. The case comes with several cable ties but I found those a little thinner then I licked so I used my own cable ties. Now came the part to start installing and routing the power cables. I highly recommend that you do not use any HDDs or non-M.2 SSDs since this would make cable management much more difficult. I did use a regular PSU and I would highly suggest at least a semi-modular PSU but it was do able and not that difficult, just took some more patience and time. Once you connected the power cables (24 pin connector and the CPU connector) I slide in the PSU and started to route and secure those cables. It came apparently quickly that using a regular CPU cooler and not a low profile one would not be a good idea as there would not be a lot of room for the fan to pull air from. Once this was done I secured the PSU into the case. Then installed my GPU and routed the power cable and secured it. My thoughts on this case are my own thoughts and are based on building in the case. This case is underrated and provides a great case to build in but requires patience and time in building which all mini-ITX builds take. I have used a ThermalTake Core V1 in the past and I feel like this case is built much better and will stand to be moved around and used. The side panels are less flimsy and are secured better. The looks on this case are great and the handle could use some redesigning such as removing the ridges and perhaps use a honeycomb pattern for grip. The RGB fan is very quite and the colors are very even and bright. When testing the system temperatures were good and did not overheat however time will tell if the thermals are good on this case. This is an initial review and I will update it if needed in the future. I would recommend this case if you are looking for a portable mini-ITX case, there are ones out there that look better but they are not designed to be transported around. If they have acrylic or tempered glass sides then they should not be used as a portable machine since they will get scratched and or broken. But if it sits at home all the time and you are looking for a beauty queen then consider another case. This is a functioning workhorse / gaming PC case that I expect will hold up very well to daily use and frequent travel. If you have read this review then you are seriously considering purchasing this case, then go ahead and purchase it and give it a fair try!