GSI OutdoorsGlass PercView Top, 1.4 inch

Have a tin percolator for camping that had a plastic top that cracked after a few uses. This glass one fits perfect and is much thicker than the plastic one.

Excelente materiales recistentes

Yes glassview doesn't fit you have to take some steps to make it fit. It's pretty simple. But once you do this you still can't tighten it down while the coffee is percolating or cooling down.I first performed a tempering process. I place the glass top on a silicone pad that I had placed on a sheet pan. Placing the pan in a cool oven along with the glass top. Letting the oven heat up to 450 degrees. I did this while baking chicken about 45 minutes as to not waste the energy during this process. The most important process is the glass top stays in the oven until it is completely cool cannot be removed very important. I repeated this three times yes it seems like a lot of work this will help relieve some of the tensions inside the glass.This is a primitive process for tempering glass. It still doesn't mean it won't break. But once you do this you still can't tighten it down while the coffee is percolating. I'll give you instructions on how to do that. But once you do this you still can't tighten it down while the coffee is percolating.did not design this for this pot. This is only for cone (conical) shaped outdoor version (/ \). Here's the simple version pick some sandpaper and sand out the whole to make it larger. If the holes not big enough on the coffee pot expands at a different rate than the glass top it will crack. But more so than not it will crack during the cooling process if it's too tight.please keep in mind that no matter what you do it may still crack. This could happen on the first use or a use 10 years from now. So you need to make the whole a little larger than necessary so there's wiggle room. I use the rotary tool method with sandpaper attachment and a fine grinder attachment to smooth it out. Making a hole about 1/16 of an inch larger than it needed to be. This was the first time I use a rotary tool ever I was very careful so not to damage the coffee pot or injure myself. Always read the instruction booklet. Keep in mind while it's percolating it might tighten itself up. When you pull this percolator off the burner make sure it's loose. Leave it on the stove until it's completely cool do not put it in water do not take it off the stove. Most of all don't drop it.If this is cold before it starts percolating it will crackAnother good train of thought never put a percolator in a sink and leave it there with other dishes pots and pans it will surely Bend or break some part of it. Always wash it after it has cooled down set aside to drain and air dry.

Absolutely will not fit the GSI Glacier Stainless Steel camping 12 cup percolator I purchased in August 2020. Neck of the glass is a larger diameter than the hole + the thread is different to that of the acrylic perc top that came with the percolator. Pointless to try to force a fit otherwise you'll end up with a bent perc and broken glass. Don't even try it. Very disappointed, given that this item as it is supposed to be a universal top made by the same company that made my percolator! Suspect this is why they don't fit glass as standard on these Percs.

A pesar de que me lo voy a quedar, muy a duras penas he conseguido que entrase en el agujero y a costa de cargarme un poco el esmalte de la cafetera. El que viene de serie no ajusta del todo y tuve que ponerle una junta de goma, con lo cual parece que va algo mejor.Este es de cristal, mejor que el que trae (que no se por que, no los ponen todos de cristal aunque hubiera una pequeña diferencia de precio)Mi cafetera es GSI Outdoors pero este articulo, para nada ajusta como es debido, suave y sin percances. Luego con el miedo de que se rompa al forzarlo al ser de cristal.Lo dicho, me lo quedare porque no son faciles de encontrar y guardare el de origen por si tuviera algun percance; pero lo dicho, si lo se, no lo compro.