OS&B ITD35 - Two Piece ABS Pipe Freestanding Tub Drain Kit & Rough-In - Easy Installation, Asymmetrical Deck Plate, Water, Air, & Smoke Testable - Designed for 8"/10" Joist Spaces & Tight Bathrooms

This is a very smart, effective and efficient way to install a vessel tub. I'd use this product again!

We had a customer who bought a fiberglass free standing tub. When we opened it, the tub came with flexible tube that connected to the tub. I did not want to depend on a slip compression joint to hold back any water. So I bought this hoping it would make my life easier. Install was easy. Breaking the tab to get to drain was a little nerve wracking. I had read a lot of reviews that said it broke off, couldn't remove, damaged gasket. I took my time. I used lineman pliers to get it out. I just went slow and wiggled for about 1 minute and it snapped right out. I did have a few little pieces aroind the edge that I thought could damage the gasket. I took my utility knife and just scraped those off. Put the included drain tail piece on the tub, put the plumbers grease on the pipe and slid the tub down. It worked great! Totally worth the money if you cannot access the plumbing from below. I will buy this again.

This is a must have item for free standing tub. Solve my headache! Easy to use and great quality. Cost a little but totally worth it.

If you are installing an acrylic or similar tub, this product, although a bit pricey, can really help. The tricky part about tubs is the connection of the drain that goes into the floor. How can you easily connect the drain to the pvc plumbing under the tub without having access from below? The product allows you to simply drop the tub into the floor without gluing the tub downspout. Just look on YouTube for video. Just make certain that the product is mounted flush to the floor and is generally plumb. Attach the metal foot long drain pipe to the tub. Grease the pipe and drop into the product. Since the tub is light, two people can easily do this... even one person if you are handy. Comes with some adapters too, in case you are dealing with 1-1/2 or 2 inch pipe.

this is a really nice product. will work perfectly for my remodel. I did not receive the item as pictured but a different model that I was able to make work. it did not have a round mounting flange or an abs pipe pigtail. fortunately, the existing abs drain pipe i had was long enough to fit the drain that was sent.

As a professional plumber with 25 years experience I cannot wait until the freestanding tub fad ends. They're impractical, inefficient and just plain annoying. The only thing securing most of them to the floor is crap ton of caulk. Please stop using them!! That being said, as long as they're around, this is the drain I'll use. It installs easily, it's never failed me yet and I can test it on the rough-in. Other companies make some that look similar but almost always have test plugs that are broken. Please stop with the freestanding tubs!

Worked as intended and is good quality.

This kit was pretty pricey but if you are putting in a free standing tub this thing is amazing and so simple to use. Just figure out where your drain will be, cut a six inch round hole in the sub-floor and screw this to the sub-floor. Put in your flooring material (in my case, cement board and tile). Hook up your drain lines underneath and you are ready to install the tub. With one person helping, we attached the tub tailpiece, lifted the tub up and slid the tailpiece into the drain. The kit is funnel shaped so it guided the tailpiece and tub right in place. The beautiful thing is that if I ever need to take the tub out for any reason there is no reason to tear out the ceiling below to unhook anything, the tub just lifts right out and can be put right back in. Everything was included. The drain kit, solid brass tailpiece and all the connectors and adapters necessary to hook this to my PVC drain lines. I'd definitely buy this again and recommend it to anyone installing a freestanding tub.

Highly recommended if you are fitting a free standing bath..

Great product

I used this to install a freestanding tub (Berlin Rouge F1) with no access below - my kitchen is under my bathroom. This worked like magic, it was so easy - just tilted the tub into it - and most importantly nothing has leaked (it’s been 2 weeks).

Moins cher qu'à la plomberie. Vraiment une bonne qualité. Installation facile.

Works great. the only problem is that it is very expensive. 80% of its price probably goes to its patent I guess, the materials itself doesn't worth that much.