YWNYT Woodworking Scriber, Multifunction Woodworking Aluminum Alloy Measure Ruler for Carpenter (Large)

Make sure you get the right size pencil to use in the holes

Was out of square when I received but it's easy to adjust.

what's pictured is a TS-3 with 1/32 markings on the sides and NO adjustment screws on the back.what arrived was a TS-3 with 1/16 markings and adjustment screws on the back. the marks are also very light and hard to readwhile the adjustment screws are good for adjusting to a perfect 90 degree, i'm not sure why i received something different from what's pictured.

The overall finish was nice, the quality of the machining was good other than one sharp edge I found, nothing that I file didn't take care of though, it's quite easy to read although I hope that the increments don't rub off but only time will tell, it's quite heavy and doesn't move around on the workbench unless you want it to, accuracy wise it's pretty good other than being just a hair out of 90°luckily on the back there are two screws that allow you to adjust it, so that was fixed within a matter of a couple seconds overall I'm very happy with it

Got this yesterday and put it through its paces, between last evening and this morning. Major points: 1. If used as a square, it is indeed square! 2. The holes intended for marking, work very well. The holes can accommodate .5, .7 or .9 size lead and the ruler side has a slight chamfer on the lead-in. .9 works very well, and the thicker lead will not break easily. 3. The rule slides easily (after all, this is the use it was intended for). 4. The sides are beveled down, which will go a long way to eliminate parallax error when marking distances. 5. The bright red makes it easy to find!All in all, this is a well made tool. I had one reservation buying this tool, and that was, that it is a knock-off of the Woodpecker ruler. It is up to the buyer to decide, but for me, with Amazon Prime, this tool was delivered at less than one-half of the cost of the other (with shipping), and it is the equal.UPDATE: this morning I decided to test for repeatable accuracy, and the tool passed with high flying colors!

Works great for what it's ment. Multiple different measurements to pull lins with

I don't know what kind of pencil the people who complained about the holes being to small to fit in the lead are using. If you are marking to the 1/32 surely you are not trying to do it with a carpenter pencil meant for framing. Any finish carpenter knows that the sharper the line the more accurate you can cut. My square arrived true to square according to every square I checked it with. My only complaint is the holes could be marked a lot more clearly. It took me a minute to figure out what row is what. In my opinion I would like the bole to angle the opposite direction. I feel like I'm working backwards. Other then that I'm happy and would recommend it to anyone who cant afford the other red tools I can only dream about

The holes are too small, can’t stick lead thru hole without breaking lead.

very well made and precise

Awesome little layout tool, fits in the apron nicely for when you need it I would recommend this for sure

good product

Was everything that I was hoping for.