Would the Fire Department have trouble entering a house with this lock in case of a fire?

I have experience breaking doors. I’ve put locks like this or better on my house knowing it will slow the fire dept down a bit but like others have said we have tools that will break even this. A halligan tool in the right hands will get through this pretty quickly, however with a lot of noise and certainly will deter the average criminal. 800lbs is a good amount of force to withstand, I think a average 200lb fireman with a halligan tool is probably capable of 1000lbs Of force applied to a certain spot on the door. If you put the lock high or low that will make breaking That more difficult. But the hydraulic tools fireman carry go up to 5000lbs.

Does it only work when someone is inside?

I installed this on my front door. As others have said, you must be inside to lock it, and it cannot be locked or unlocked from the outside. So you have no access to the door from the outside when the lock is in place. I keep it locked all the time, even when I'm not home, because I go in and out through my back door. For extra safety and strength, I installed two of them on my front door, one about chest high and one about two feet from the floor. I did this because I have a glass panel on the top half of the door, so if a burglar breaks the window, the bottom blocker is out of reach. As extra security for my back door, I installed a security door (like a screen door except it's heavy gauge metal with its own handle lock and deadbolt).This door blocker is extremely well-made (heavy metal) and is a fantastic product. I highly recommend it.

do the screws come with this, or if not, what size do I need to buy

Yes screws come with this device don't use them they're garbage go buy yourself some good heavy duty three to four inch screws from the hardware store so you can get into the frame of the house not just a door frame it'll make this device a lot more sturdy

I bought this but cannot open it. Is mine defective or is there a trick to opening it?

Sometimes you are right. I had one defective out of three I received. The spring was loaded improperly which made the latch always to be in the open. Or if I forced it, the spring would dislodge and make it difficult to even close. And once closed it would not open. Now if that is the case then you need replacement. However, if you are trying to understand how it works, all you have to do is when the latch lodged in the recess, basically in its closed position, pull out as if you are navigating around the latch notch that stops it. So the idea is pull laterally first and then turn the latch around the notch. Hope that helps.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Desert Online General Trading LLC

Dubai, United Arab Emirates

Description

KEEP YOUR HOME SAFE - Designed to withstand 800 lbs. of force, this U 10827 satin nickel finish door reinforcement lock helps to prevent doors from being kicked in, increasing your home security and keeping you and your family safe!
EASY INSTALLATION - The included 3" hardened screws make installation a breeze - extra security and peace of mind can be achieved in just minutes. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch
ADDITIONAL HOME SECURITY - Use this high security door reinforcement lock for additional home security on any swing-in door of any door thickness. It helps to ensure any door cannot be opened from the outside.
CHILD-SAFE AND TAMPER-RESISTANT - This door reinforcement lock has a spring-loaded design that is both child-safe and tamper-resistant. It can be installed higher on the door where your children can't reach! Plus, not only can doors not be kicked in by intruders, it protects against lock picking and bumping while in the locked position.
WATCH THE VIDEO ON THIS PAGE for installation tips and operating instructions.

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a satin nickel anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the U 10827 door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

Brand	Prime-Line
Special Feature	Weather Resistant
Lock Type	Rim Lock
Item dimensions L x W x H	6.4 x 3.5 x 7.6 Centimeters
Material	Aluminium
Recommended Uses For Product	Home security reinforcement, door reinforcement against forced entry
Style	Lock
Colour	Satin Nickel
Number of Pieces	1
Finish Type	Satin Nickel
Included Components	1 door lock
Shape	Rectangular
Item Weight	168 g
Control Method	Touch
UPC	049793108272
Model Name	Door Reinforcement Lock
Global Trade Identification Number	00049793108272
Manufacturer	Prime-Line Products
Department	Unisex-Adult
Item model number	U 10827
Product Dimensions	6.35 x 3.51 x 7.62 cm; 167.83 g
ASIN	B00D2K367Y

Prime-Line Products U 10827 Door Reinforcement Lock, 3 in. Stop, Aluminum Construction, Satin Nickel Anodized Finish

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions