🔥 Ignite Your Comfort with Style!
The HHTQuadra-Fire, Heat N Glo & Heatilator Pilot Assembly NG (2090-012) is a high-quality, durable pilot assembly designed for natural gas fireplaces. With dimensions of 18.7 x 15.8 x 3.7 cm and a lightweight design of 131 g, this metal-finished assembly is easy to install and requires no batteries, making it a practical choice for enhancing your home's ambiance.
| Package Dimensions | 18.7 x 15.8 x 3.7 cm; 131 g |
| Fabric Type | Metal |
| Finish types | Painted |
| Batteries required | No |
A**D
foyer propane
la piece fait tres bien et fonctionne
C**N
Perfect fit
Easy to install and fireplace works like new
S**R
Make sure to match with your fireplace model!
I got this thermocouples for a fair price and shipped fast from TX. Install was about 15 minutes total, and works fantastic! Gives my gas fireplace new life! Now more shutting off on its own! Very happy!
J**K
So far, so good, works for my Heat N Glo 750
I have a Heat N Glo SL-750TR-IPI-E fireplace that is approximately 11 years old. Recently, the fireplace would be working for a period of time before it would flame out and go off. It would not start back until it cooled off, so based on what I read, decided to try changing the pilot assembly as this was considered the most likely culprit. This assembly is exactly the same as my original assembly, but make sure you check your manual and get the correct part number for your model.Replacing isn’t too difficult or time consuming, unless you have to remove the complete top section of the fireplace burner plate. I didn’t have a lot of room to work under to remove the line that regulates the gas for the ignitor, but I did manage after a few minutes of struggling to get it loosened and undone.To remove the old assembly, first, make sure you turn off the gas line and unplug the power plug from the transformer underneath the burner assembly. Remove the regulator from the gas valve, unscrew the assembly plate (which is one screw), unplug the two wires (one white/one orange) making sure you notate which wires go where in the control box. Pull the assembly through making sure you hang onto the rubber wire holder as this one does not come with that.Then just reassemble. Make sure you tighten the regulator into the valve, plug the wires back, screw the assembly plate together, make sure the wires are seeded into the rubber holder. Turn on the gas and plug in the power transformer. Make sure you test by powering on the fireplace and check for leaks.My fireplace started up with the nice crackle sound of the pilot and fired up with no issues. So far, the fireplace is working as it should. Hopefully this will fix my flame out issue. IF this lasts as long as the original, I will be happy. Unfortunately, this part only carries a 90-day warranty.4 stars
T**K
Direct replacement part
Price was right and easy to install
Trustpilot
1 month ago
1 month ago
