XTOOL Anyscan A30D OBD2 Scanner Diagnostic Tool - Bidirectional Scan Tool Wireless - Lifetime Updates & 19 Resets Crank Sensor EPB Throttle Relearn - Full System Car Code Reader for iPhone & Android

I received the A30D yesterday and got it configured today. Setup and connecting to Bluetooth was easy. Downloaded all the software updates. So far, it's easy and straightforward to use. I successfully tested the electronic rear parking brake actuator deactivation and activation function on a 2019 Hyundai Tucson. It works great! Thank you again for including this important feature. My pre-purchase emails with questions to [email protected] have been promptly and courteously replied to. So far, my experience with the product and their support is great.

XTool A30D I recently purchased the XTOOL Anyscan A30D wireless scan tool. I already have the XTOOL IP608, which has been great. It has helped me to pin point some issues I was having with a vehicle throwing codes, that had nothing to do with the sensor that was bad. I wanted a device with some bi-directional capabilities, allowing me to activate sensors, relay/switches, etc. to better troubleshoot issues that I may have. You only need to download their XTOOL Anyscan app/software to your device (phone, tablet, etc), activate with the information given with the device (S/N & activate code), update any information that has come out (since the A30D was put in a box), plug the device into your vehicles OBD connector and connect to it via Bluetooth. You are ready to go! You don’t need Wi-Fi to use it on the vehicle (but it would help if you need to look up any information). The unit itself displays your battery voltage as soon as you plug it in, So you know, whether or not battery voltage is an issue before you even begin. This scanner allows me to be out of the vehicle, wirelessly. With the live data feature, you can be under the hood, make changes and see the results in real time. It tells me everything any of the sensors are reporting. It’ll even start the car, so you aren’t running back and forth! It allows me to graph multiple values (up to 8) at the same time, I can record the live values to review or compare to values after any changes have been made. With any of the “Special Features” you can reset/relearn the throttle body after a cleaning, rest TPMS, battery reset, abs bleeding (activates the abs pump to bleed the system thoroughly!), release the electric parking brake when replacing brakes, and a lot more. There are currently 19 “SpecialFeatures” but having a XTOOL scanner for a while now, I’m sure there will be more. They are constantly upgrading and adding to their program. Of course you can clear any codes, turn off the oil change light and any of the basic features any cheap scanner will do. With lifetime FREE updates, you don’t get roped into another subscription, which is nice! I’ve had questions in the past and they are quick to respond, so it’s not a case of you buy it and you’re on your own. They seem to be a company that really stands by their products. So far I’m very impressed with what this thing can do. I haven’t even gotten into everything yet but I look forward to hooking it back up and using (playing?) it some more!

I've tried many an OBD-II scanner. From the first Bluetooth models that paired with Android Torque, to some of the newer dealer clones. I must say, this device shows great promise. The tech support is relatively responsive, depending on the time of day. There are a lot of language breaks in the software, but once you're used to those then you'll be working just fine. You WILL need quite a bit of space on your device if you want to download ALL of the manufacturer modules. Each car manufacturer has its' own download, along with some of the other functions having their own module. The software works pretty well, but definitely there's a lot of room for improvement. However, it's still a huge value. In testing my aunt's Lexus Hybrid, just connecting to the engine module and getting live data took about 60 seconds to pull all of the data. But there were seriously around 900 data points that were queried. This thing is seriously way beyond any scanner you've used before. It will connect to any number of independent systems in the car, provide live data for each, as well as scanning for fault codes not otherwise shown on generic scanners. The best part is that there are a ton of actuation tests that you can perform. But you must be careful with these, and make 100% sure you know what you're doing. You could definitely screw your vehicle up if you just go poking around and trying different actuation tests. Depending on which device you purchase (the devices themselves are identical) -- you'll get a license code that will enable certain of the special functions. If you plan to use on multiple cars, then get the most expensive one -- you'll get plenty of use out of it. Get yourself a good protective case for the unit also (it should come with one, seriously.). Save the tiny piece of paper that comes with it (or take a picture). Using an iPad is the optimal experience, but again you'll need a bunch of free space. I got free space errors even when I had 128GB free on my 256GB iPad so it can be finicky for some reason. If you have a technical mind then you will be in heaven with this device. With free lifetime updates, this is a major steal and you should jump on it now! I bought one for myself and one for my father. Don't wait... Just click and buy! You can always return it if you dislike it for some reason! (Plus it has a flashlight built into the adapter! Major WIN! LOL. The device is very well built and not flimsy feeling in the least bit). You can generate exports in PDF format of all of the data collected in live scans, but you cannot export raw data from a capture. This is the only big downside in my opinion. If you're trying to diagnose something and want to review live data, the best you'll get is reviewing it on-screen after recording. It even has space to enter your business details so they can be added into the PDF reports. Huge huge value, no kidding. I was not compensated or encouraged to leave this review. Good luck! --Josh

So far so good, it's app it's quite easy to navigate, and provides a lot of information, the license does not expire, and the integration of a small lantern on the obd reader is a plus when working on the night or dark spaces, totally satisfied with it. The only con might be quality of the construction which doesn't feel as sturdy as some others, but for your average driver or occasional mechanic (DIY) it's a bang for the buck. The device is quite small and light, so it fits in any glovebox, but on my personal case that means it's prone to miss inside the car, so I just got a small specs case.

Sending back. Won't recognize my 2022 Kia Stingers VIN. Downloaded and installed 80+ updates and I still have to type in my car's VIN. And it won't do the one job I bought it for. To reset the TCU. You had one job.

This tool offers more for the money than any other device I looked at. Customer service is top shelf service. The tool does everything I needed. It was so easy to reset my transmission. I had never used a device like this before but with the guidance at tool they made it so easy. Thank you XTOOL

received used. Not happy.