Titan Attachments 3 Point PTO Finish Mower, 48" Cutting Width, Category 1 Hitch, Rear Discharge, Requires 18-30 HP Tractor, Low-Noise Cast Iron Gearbox

I was impressed how well it was crated for delivery. Every part was wrapped in foam and bubble wrap. Remember to fill the gear box with 90w oil. It is empty when you receive it. It's also a good idea to apply grease in the required locations. The mower is very well made with heavy duty wheels. It looks great behind my 1957 Ford 640 tractor.

Mowed nicely but the wheel bearings fell out and after 2 weeks of waiting for a response from titan yet to receive one

I decided I needed a mower for my Mahindra 25xl, and didn’t want to mess with a drive-over or pay 4k for it. Titan makes solid products, but there is usually some rigging involved. I’m comfortable with working with steel unless there’s welding involved so I took a chance. This one has absolutely nothing wrong with it.Came UPS freight which was great since they brought a small lift gate for the residential delivery. The mower was by far the most well-packaged implement I’ve ever received. The angle iron cage it came in, all the fasteners temporarily seated in the right place. Really didn’t need more than the picture to put it together. The top bar of the cage came apart with two bolts and once you have the lift frame assembled, attach it to the tractor and lift it out of the cage to attach the wheels. Incidentally, I am making an outdoor coffee table out of the shipping cage, sanding and painting it, topping it with cedar.. very impressed.It is not shipped with gear oil, which I would gripe about, but not a deal breaker. Almost missed reading the sign about it.Attached easily to the tractor because of the wheels. 48” is a perfect size for my 25hp. I don’t know that it would be good for a smaller tractor or much larger for that matter.Adjusting the height involves adding or removing spacers on all 4 wheels which are spring-loaded. Less spacers, the more the springs can move and the mower can float with a higher cut. The more spacers, the lower the cut and more rigid the mower height, which if you have uneven terrain chops into the dirt. Not difficult to adjust, but not a lever either. Small learning curve to get it right for your situation. Don’t cut a nice manicured lawn until you know how it acts.I wouldn’t call this a finish cut like a riding mower. It’s more like a mini bush-hog, which is fine for what I need. It’s not bothered by bad terrain or rock, which is good for New Hampshire. The blades are not expensive to replace. To be fair, I was cutting very long field grass and a rough lawn that had overgrown because my riding mower died. I was hoping to replace it with this, but I don’t think it would. Maybe in a pinch. Thankfully my other mower can be fixed, so between the 2 I have everything I need for mowing roughly 5 acres of lawn and horse pasture without dragging out a large bush mower and having to disconnect my backhoe off my other large tractor. For over grown 3 foot tall grass, 2 passes did a decent job without breaking a shear pin, which I assume it has.Only used it once, but seems well-built and easily serviced. Happy with the purchase overall. Just a note: I received an orange painted model not black as pictured in the description. Still not a deal breaker.

This is a GREAT mower, but it took several extra days to receive it.During those extra days, Titan dropped the price by $400, but Amazon didn't, so I paid an extra $400.

The media could not be loaded.  - Issues with TitanWARNING!!! DON'T BUY ANYTHING FROM TITAN THAT HAS A PTO SHAFT! The first shaft I received was bent. I waited a whole month for another PTO shaft as they had none in stock, the second shaft I received about 4 weeks later also had it's own set of issues although it wasn't bent, it had tons of inexcusable quality issues. The nipples to grease the shaft were painted over and couldn't grease them at all until I poked the inner grease ball with a philips head screwdriver to remove the paint, I also for the life of me couldn't get the stupid yoke slipped on to the pto shaft since the clearances were so tight! I think the paint inside the yoke was just enough to cause issues slipping it on to my tractor. If you do order anything with a PTO shaft from Titan, explicitly state you want the shaft shipped separately! If you don't more than likely it's going to get bent.- The MowerMy only complaint about the mower itself is the Lynch pins that hold the wheels on, they can easily fall out. I've already lost one on my first cut so I can't raise the mower off the ground without one of the wheels falling off, a cotter pin would be a much better alternative and a cheap remedy in my opinion, or at least include a few extra Lynch pins for just these situations.- ConclusionOther than that, with a quick hitch from land pride and land prides floating top link add on (320-052A) this is a really nice setup overall. Not to mention with the overall theme of Orange with my flavor of tractor. If I had a proper working PTO shaft from the start that doesn't require HEMAN to separate and not have all these glaring quality issues that SHOULD HAVE BEEN CAUGHT AT THE FACTORY! I can imagine I'll be very happy with this mower.

Arrived in fairly-well protected cage, and I mean that despite FedEx's shipping. Somehow one zerk fitting on a leg was snapped during shipment - I notified them via Amazon messaging. Despite supply chain challenges, they supplied a zerk replacement.Otherwise, it mows just fine after fitting the PTO shaft to your, particular tractor. Mine is a Kubota BX23s.

I purchased this mower to mow my field and was expecting this to mow better than my brush go woods mower. This is a 6ft 72" wide with 3 blades and would expect this to mow like no other compared to the brush hog mower that is a single blade. I don't have any issues with quality or things failing other than the quality fo the mow job it does. Im using the Kubota LX2610 ROPS tractor and has not problem with the size of the mower. I can only wish Titan offered some sort of mulching blade since the blades on this thing were dull and not really a good blade in my opinion. I can only hope Titan sees this and can make a recommendation for an optional blade that will change my opinion on this pull behind mower.

Good quality, good welds, well made. It arrived in a welded metal cage, so make sure you have a torch or cutting wheel on your grinder. But that is ensuring that you get undamaged equipment and they wouldn't go the extra mile if they weren't proud of their product.