MICROJIG GRR-Ripper GR-562 Limited Edition Complete System Double Piece, Yellow

Very versatile tool. Definitely slowed me down over all while I am getting used to adjusting all of its features, but it’s solid and much safer than anything else on the market. I had a cracked piece on one of the handle mounts. Called Microjig and they sent a replacement part out at no charge. Great customer service.

I have been involved in woodworking for a long time. I saw the Micro-Jig GRR-RIPPER years ago at a woodworking show and dismissed it as a gimmick because I felt it looked like a toy. Recently I needed to rip a large number (50+) of 3/32” strips of hardwood. I purchased a few different thin strip rip guides and none of them produced consistent, repeatable results. I saw a video for the GRR-RIPPER here on Amazon and decided to take another look, so I purchased a set for my 10” cabinet saw. I am very glad I did. The GRR-RIPPER Complete 2-pack is incredible and worth the purchase price. I was able to precisely rip all of the 3/32” strips with end-to-end consistency and accuracy. The level of control of the workpiece is incredible. Yes, 3/32” is thinner than the 1/8” leg of the GRR-RIPPER is intended for ripping and at this thickness the 1/8” leg is sacrificial, but that is to be expected and the 1/8” leg is easily replaceable. Yes, you need to assemble the GRR-RIPPER yourself, but there is a good reason for this. The GRR-RIPPER is so versatile and customizable for a wide variety of woodworking tasks that without knowing how the unit is assembled you will never realize the full potential and versatility of this tool. The construction of the GRR-RIPPER is very well thought out and it is obvious that the people at Micro-Jig understand the issues we woodworkers face on a daily basis. Something so simple as a rubber o-ring to hold screws in place is a real time saver. I have a new appreciation for Micro-jig products and plan on purchasing additional accessories in the near future.

Now that I have used it for quite a while I think it is one of the best investments I have made! It is much easier to keep the wood from moving away from the rip fence and it really helps stop dangerous kickback!! BUY IT!!I had to rip quite a few boards for cabinets and these worked great! I could keep the wood pushed up against the fence while guiding it thru the saw blade without my hands being anywhere near the blade! Exactly what I wanted! Since I haven't had these very long I don't know how long the rubber grip will last but as of now....its worth every penny!

I purchased the complete set. Yes it was expensive but so are my fingers. I haven't use some of the accessories but the actual product is very well thought out and you can tell it has quality. If you can afford them I would recommend them for the novice woodworker (I'm including myself in that description) or a Pro they are well worth the money.

I have been using GRR-RIPPERS for as long as I can remember. I bought this set to give as a Christmas gift. The GRR-RIPPER system is perfect for use with table saw, router tables, disk and belt sanders, jointers, and any other stationary tool where your hands come close to the blades. They keep your hands and fingers safe, and also help prevent kickback on table saws. It's the best thing to happen to wood and fingers since power tools were invented.

Solid and functional push blocks. The adaptability to the work one is doing is great.

These are simply the best push blocks around. Pricey, but you get what you pay for. Having the ability to change the angle of the handle is great for added safety.The first time you make a cut with these you’ll feel the improvement immediately. Safer cuts are much much easier with these.

I never review products but I felt compelled to review this. These are absolutely a must have if you own a table saw. I used them for the first time today on my Powermatic 66 which lacks the newer safety features. I feel very comfortable and safe using these compared to using the old push stick. I will also be using these for the jointer and band saw. I was skeptical at first due to the $200 tag, but based on other positive reviews I would give them a try and very glad I did. It's a small price to pay to help from having a finger cut off. To add to the safety of my saw I also just ordered the Micro Jig splitters.

Práctico y muy útil, indispensable para hacer cortes con nivel de riesgo alto.

Wow! This double pack is very complete. I have yet to use all the attachments but I am sure that I will and my fingers will be glad for it. This is a clever push stick and I am sure with use it will become second nature to adjust it for different cuts. Made of quality materials. Buy it and use it...It's the smart thing to do. Put it all into a tool box to keep everything together.

Cannot rate! Arrived on time, but it’s a Christmas present for my husband…

I use this product for safe use of my table saw.

Safety comes first in any job that we do. The “GRR-Ripper 3D Pushblock” puts your safety at the forefront when doing any woodworking project.The “GRR-Ripper Complete Double Pack” comes with the User Manual, Warranty and Registration papers, 2x Main Body, 2x Center Leg, 2x 1/4 inch Leg, 2x 1/2 inch Leg, 2x Hardware Bag, 2x Handle, 2x Balance Support, 2x Stabilizing Plate, 2x Adjustable Spacer and 2x Hardware Bags for plates and spacers.It called a 3D Push Block because it allows the user three directions of control: Pressure downward on the table, inward toward the fence and forwards through the cut. The green grips on the bottom of the block grab the wood and keep it from sliding.It allows you to control the block of wood through the entire cut while keeping your hands separated from the blade. The constant pressure that you apply throughout the entire cutting process results in a cleaner cut. It will reduce blade and burn marks by keeping the wood in constant movement through the cut process.The blocks work as a moving blade guard. The cut is controlled from the top and complete control is achieved with one hand.The push-block prevents kickback because it keeps the wood tight against the fence and down on the table, both the keeper and the off-cut of your wood are kept under constant control. It also eliminates the need for push-sticks, keeping your fingers safely out of harm's way.Achieve small cuts by using the Balance Support. It provides even pressure on smaller cuts and prevents side wobble. The center leg is also adjustable to help create small cuts.Set the balance support on the side with the 1/2 inch leg for larger cuts.You can individually replace the legs of the “GRR-Ripper” if you accidentally cut into them.Use the push-blocks with a variety of tools in your workshop like the table saw, band saw, router table and joiner.When cutting material that is 18 inches and longer use two grippers for best results. You can move the grippers hand-over-hand to keep pushing material through without stopping, like a power-feeder.You can also do mitre cuts and with the “GRR-Ripper”.Accessories1/8 inch LegUse the 1/8 inch leg to make 1/8 inch cuts. It attaches to the main body by removing a leg or onto either 1/4 inch or 1/2 inch leg.Handle Bridge KitThe handle on the main body of the block is in the center to allow even pressure across all three legs. The Handle Bridge Kit allows you to re-position the handle while still applying even pressure. Find the position that is most comfortable for you to use.The trailing hook helps move your wood throughout the cut.This kit includes 2 handle bridges, trailing hook and hardware.Deflector / ConnectorThe Deflector / Connector protects you against wood chips and debris.It also attaches two grippers together for larger cuts.For shorter cuts, the push-blocks can be attached side by side. Attach the push-blocks end-to-end for longer cuts.This set includes Deflector / Connector Plate and hardware.Gravity Heel KitUse the Gravity Heel Kit as a static heel to support small pieces from the back.You can also use it as a dynamic heel. Loosen the heel when working with longer pieces of material. It will retract up until the end of the cut when it drops to the table to push the material through the cut.