Zhengmy 50 Pcs Trailer Frame Wire Clips Stainless Steel Metal Cable Clips 22.5 mm/ 0.89 Inch Solar Panel Double Wire Clamps Trailer Clamps for PV Wiring Boat Cable

I was refurbishing a 5x9 trailer that had the spring steel clips holding the trailer light wiring, or at least minimally so. The manufacturer had placed them about every 3 feet and at direction changes allowing for excessive sagging which caused it to be susceptible to damage. They were rusty and lost their 'spring' allowing wires to fall out or just come off the frame of the trailer. These being stainless steel means that is no longer a concern and as inexpensive as these are, I have firmly and neatly secured all of the wiring where it is no longer in harm's way.

Good wire clips worked perfectly for what I needed to do.

I bought these to replace the crappy clips that came with a Harbor Freight trailer. Wish these came in a smaller package but the quality is good although the wire loop is a bit small. I used wore loom covering to encase my wires. I ended up using 2 zip ties to attach the loom to the loop opening on these wire clips.

Gods quality, great value, and held my cords and wires perfectly. True to size and great functionality! Go ahead and add it to your cart!

I used these clips on my HF folding trailer. They don't give you enough in their original installation kit. These worked well, but I did squeeze the wire holding loop down a little tighter for the places I was only holding a smaller set of wires like in the picture. Got plenty for a good price.

At first I thought these wouldn't work with the IronRidge XR-100 solar panel rails but after revisiting while installing a new row of panels I discovered these DO work. It's an extremely tight fit and I had to try to bend them out a little and then force them in the groove but once they are in they hold very well. In fact, I'm not sure they will ever come out of the rail. They don't really hold multiple wires and probably wouldn't work too well with large gauge wires. They work very well with the Enphase microinverter Q cables though. Much more economical than the IronRidge plastic clips although those do hold more/larger wires if needed.

Very good and easy to use

These wiring clips are stiff to slip onto the trailer frame initially, I think this is a good thing as they are nearly impossible to remove once placed. Hopefully this is a sign that they will never fall off while driving.