PC1010N 1/2-Horsepower 1-Gallon Hot Dog Portable Air Compressor, Finish and Trim, Front Control Panel and Protective Shroud

I have a large compressor for my garage, it's big, noisy, can power all kinds of tools, but in my basement shop, I need something quiet, that can work with a wide variety of small tools, and is easy to move around. So it is quite light, it's attractive (well, to me), when it runs, it has a pleasant chuffing sound, and it has sufficient capacity for electronics/woodworking/modeling uses. You can even use it to blow dust out of old electronics, although that will deplete the tank pretty quickly. Refill time is adequate, and with most tools not an issue. Use it within its design parameters and you'll love it.

I have a bad back so I was in search of the lightest and smallest compressor I could find for mobile jobs. This was just about as light as they get, but I did not sacrifice one bit of performance with this little machine! It's very VERY quiet, extremely reliable, recharges itself very quickly, and of course it's light enough to carry up staircases, etc. without being too much of a strain. I would buy it again in a heartbeat! Highly recommended!!!

Got this for cleaning hw heater tank. Portable and works really nice. Since it's mini size i not sure how it works for nail guns. I have a huge compressor for that use. But for what I need for it's perfect.

When I was going through a kitchen remodel I noticed the wood trim guy using a small air compressor inside the house. Intrigued I spoke with him about it. I have a small pancake compressor and it is loud, so loud I cover it with a box and towels to muffle the sound. And then use hoses. Or wear ear protection. Here this guy was using this compressor inside and it was a little louder than a washing machine. When the current compressor was in a slow death mode and I had finish carpentry to do, I bought the same model and got some of the newer style hoses as well. I was not disappointed. The cycle time seemed pretty quick, a perceived 1-2 minutes. Mated with a 25' hose and a Porter Cable brad nailer I was able to sink a couple dozen two inch brads into a 2x4 in fairly quick succession. Aside from that it has a compact design with the right stuff shielded and the right stuff exposed. Also has a longer cord than the old compressor. I'm happy with the purchase. First big home job is coming up. I'm banking on ditching the old compressor.

Worked great for upholstery project using air stapler. Really easy to understand instructions if you haven't used a compressor before. Smaller donut doesn't take a lot of space to store. Gets a little noisy but not super loud. This is a good compressor for around the house jobs.

Very quiet and well designed. Quality and toughness you would expect from Senco. Great for light duty nail and brad guns and some inflating. Make sure the one gallon capacity and refill rate is the right size for you as it depletes rapidly and refills rather slowly.

Nice little compressor for around the home but i ran into a few problems. First the controls were leaking air and i had to find a service dealer otherwise it would have had to be shipped. I didn’t get around to using the unit until 30 days after my purchase, so i couldn’t send it back. The local rep whom i thought was a great guy at first ended up being not so nice and tried to charge me for a warranty repair. we battled and his contention was he said it was used and out of the one year warranty - after battling and then finally finding the manufacture date which was only 4 months ago, he finally released my compressor. It’s been a month since the repair and it’s leaking again. I recommend Emglo, i used them years ago and they are workhorses and they honor their warranty. I used to own senco nailers and loved them - don’t but a senco unless you know for sure there is a local repair center. we have many senco dealers, but only one that repairs senco compressors. I am going to sell the unit and make a new purchase. Now something positive, it’s a good unit was a fairly quick recover. great for finish amulets, but I am using it for auto detailing, pets cleaning, and furniture restoration and filling car tires. mostly use the blow tool.

Compact and quiet… Which was very nice. Love the design. But they over advertise their capabilities. This compressor failed to reach 124 pounds for 12 minutes even though they advertise it can push out 135 pounds. Will not work for RV tires!!! it took 15 minutes to add 6 pounds to one RV tire from 89 pounds to 95 pounds.

Es bastante pequeña y tarda mas o menos algo de tiempo en llenarse hasta que se apaga automáticamente. Al ser un tanque tan pequeño se vacía muy muy rápido por lo que solo te servirá para trabajos pequeños con aerógrafos o clavadoras (mas o menos 6 o 7 clavos o grapas de calibre 18 antes de que encienda el motor de nuevo y tarde 30 segundos en llenarse y apagarse de nuevo). Si la piensas comprar para utilizarla para pintar, seguro no te servira ya que produce muy poco flujo de aire y aunque la tuvieras encendida todo el tiempo, aun asi no te dará el flujo de aire necesario para una pistola para pintar. En cuanto al ruido que produce es mínimo comparado con un compresor mas grande, por lo que es muy muy silenciosa. Algo para tomar en cuenta es el precio ya que cambia constantemente y a veces esta un poco exagerado para el tamaño de la misma. En conclusión si la necesitas es para usar con clavadoras o aerógrafos está es para ti ya que es muy pequeña y muy fácil de transportar. Espero les sea util mi reseña, gracias.

Satisfecho con el producto trabaja muy bien

Buena presentación, buena calidad excelente producto, cómodo para trasladar y fácil de manejar, cumple con lo que esperaba.