Odyssey Armrest Cover Replacement,Leather Seat Armrest Covers for 2005-2010 Honda Odyssey(Darker Gray)

The fit is perfect, the quality is top notch, and the beige color is almost a dead on match for my 2005 Odyssey beige leather. The color is right, they just look newer. I did both in under 10 minutes with a screwdriver to pop off the bolt cover, a 12mm socket to remove the bolt, my bare hands to install the new cover over the old one, and a razor (actually, a scalpel) to cut a hole for the bolt and bolt cover.Install tips:1). Ignore the poor reviews, these are exactly what you need to cover up those crappy old ones.2). Put the armrest through the hole and then push against the floor to get the new cover on as far as it will go. Then you get a finger or two under the inside of the cover hole, brace the cover between your knees, and stretch the rest of it on. It literally took me 30 seconds to get each one on.3). Push the bolt cover onto the leather over the hole, trace the outline, then use a razor to cut the opening.4). Laugh at the sissies that couldn't get these on and bask in the glory of your renewed armrests.Put on your big boy/girl pants, you can do this.

Wrapped old arm rests in cling free, and slipped on great 10 minutes maybe for each arm rest

They are tough to get on, but I think that's why they fit so well, they're snug, look and feel good.

As other reviews state, it's not a perfect color match, but other than that it looks great. Installed on 2007 Honda Odyssey EXL. It's 16 years old so a slight off color doesn't bother me and for only $17 it's worth it. You can really see the color difference in the pics with the factory bolt cover installed. With that said, they covered the old ones great. It takes a little manhandling to install it but I found the material stretches, so if you get to a point it won't pull anymore just wait a minute for it to stretch then start pulling again. Took about 15 minutes for each side which includes removing and reinstalling the armrests.

Great fit, color matches just fine. Easy to install

I need to say this is really good product if one owns a 05 - 10 Honda Odyssey and is looking to replace worn armrest leather covers. I just installed a pair on my 2006 Odyssey with 98% percent satisfaction. I gonna tell you why not 100%. The product was carried and delivered by Amazon, so it came quick as always. The package has a pair of the high quality REAL leather covers. Even the original Honda OEM leather cover was NOT as good as the product I received. The Honda original OEM part was actually made of Synthetic leather, which was layer of plastic / rubber material on the top of fabric. When my original cover was scratched, the top plastic layer was ripped off, and the area expanded bigger and bigger. so, I finally decided to replace / cover it. Again, the product was made of genuine leather, I won't worry about scratches anymore. The product is in right size. After watch a clip on youtube, I figure out how to install easily. The overs were very tight after installed on the top of old covers, and they fit good. The only 2% in-satisfaction was actually an improvement point. The color I ordered was a DARKER GRAY; however, the ones I received was much lighter than the color on my seats. I guess the leather seat in my car may changed darker. But, seller need to be aware it that the product is to be used in OLDER cars anyway, so they should make the color REALLY dark to make 10-year old dark gray. Except this I am TOTALLY happy with my purchase. Highly recommend.

The cover needs a larger opening to slip on to the arm rest and will not go on as designed. One would need to cut and modify the cover to create a larger opening. Too late to return ... :-(

I wish the OEM leather was this good, where this is actual leather and the factory is vinyl. This one simply installs over top of the factory covers - no plastic bags or lube needed. Just work them down from the middle row pulling down and they go on with no problems. Just be sure to take the bolt covers off before you start in case you need to ever get access to those nuts to replace the armrests. Only other tool you’ll need is a utility knife to poke through the new cover to cut a hole for the plastic plug. Just feel for the hole and keep poking through making small punctures every 1/4” and eventually you’ll make a circle that can be easily trimmed out the rest of the way. Great value for color matched leather armrests.