(Pack of 100) 1.5mm~10mm，Replacement Repair Rubber Conductive Button Pad Keypads Kit，Buttons Repair Replacement Part, for IR Remote Control, Xbox Playstation PS4 Switch Pro Game Controller

Let’s see, on the first day I have repaired two remotes and a large humidifier. All just had worn out pads inside. 10 minutes worth of putzing, four 3 mm pads, and 4 drops of super glue and viola’, I can stay in my chair and turn on a TV. That’s a win.

Didn’t work for me. As others have stated, there is no sticky backside, so you will have to glue them.

I have an old Agilent 54622A oscilloscope I got from an auction. It had been decommissioned after 20+ years of service, and all of the softkeys below the screen were virtually unusable. I had tried cleaning the copper pads with printer paper and alcohol, but unfortunately this solution would only last a day or two until the reliability issues returned. Eventually I measured the carbon pads on the silicone mat with my multimeter to find the resistance in the kOhm region, far higher than these pads should be. These carbon pads ended up working fantastically for my issue. The assortment of sizes was nice, since I can guarantee that I will replace more of these in the future now that I know how. I'd recommend pairing these with a bottle of silicone adhesive, since there is no adhesive built-in. The repair will most likely be a destructive process, since generally from the factory these carbon pads are permanently bonded to the silicone, if not physically the same polymer, so you will need to do some slicing with a fine blade like an xacto knife. Really the only downside to this product was that there weren't more in the package. I feel like I used half of the bag of the size I was using just from a single job. Besides that, these pads were a dramatic upgrade from whatever gummy nonsense was previously on the buttons.

I don’t know how sticky this is yet, because I haven’t applied it to the buttons, but I need to replace a few buttons on a machine and this is conductive material and it works. It comes in different sizes, which is very useful.

These come with no adhesive. You have to buy something else to make them work. There should be many more smaller pads. I couldn’t finish 1 remote with the same size pads. Would advise customers to buy some that come with adhesive.

Works well, but not a lot of each size.

Not adhesive; thus very difficult to work with.

Works great

Very useful, it can be used to repair remote controls and key board of panels