PETG 3D Printer Filament Bundle 10 Packs, 10 Colors, 5kg Total Weight, No Tangle, No Clog, No Bubble, Enhanced Adhesion, 500g per Spool, 10 Assorted Colors 1.75mm Filament Multipack

I got this smaller roll because I needed the gold filament for small parts for my Lysandre from Pokemon Cosplay I'm working on. I was pleasantly surprised by how nice this printed. I was afraid because I needed to try some budget PLA Slik that was on the cheaper side because I didn't need much to make the parts I needed. I will be using the rest of the roll for something else soon. Super Shiny and nice to print with. I've not printed with silk before so I might not have the best idea of how silk PLA is but this cheaper silk PLA was great to work with.

This filament was a "get the cheap crap" purchase so I could make some mother's day stuff. I am very happy to report that not only does this stuff print well it fits the AMS lite without the need to respool... I will say the fit is snug and getting them off is a joy but not so bad I would not use them on it.

The media could not be loaded.  Good bad adhesion no clogs recommend this filament try the other filaments cheap filaments and you can tell the difference this was definitely high quality no complaints

This company has great customer service. They worked with me to ensure I was drying the filament really well before printing which is absolutely necessary and greatly improves print quality and success rate.This was my review before further testing with the support of their customer service: This filament has given me countless headaches. Unlike other PLA filaments, it tends to ooze and create blobs on any prints. Very often blobs are big enough to cause the hotend to crash and dislocate the part or bend the hotend. Sometimes the filament simply stops feeding, and it appears there is a clean break in the filament that prevents the extruder from continuing to feed filament to the hotend. I have had many more failed prints than successful ones.Colors are nice though.

Somewhat skeptical when ordering this unknow brand, but printed beatifully using extruder temp of 21o and bed pplate of 60

Does it glow? yes. Does it take a burst of sunlight to make it happen? yes. I can use a blacklight to charge it, but at that point, fluorescent dyes would be better... disappointing glow effect, but I think blue is just like that.Adhesion is Good, but it breaks away from itself on a prime tower break test, so it stuck to the black pla better than it stuck to itself. No it's not the most scientific test, and I don't see a problem in the build itself - it stuck well to the plate on some intricate curves, even being the first filament on the plate. Bambu X1C on a cool plate - no glue, 55 degree plate temp.That being said - it only went through my AMS after I transferred it (respooled) to an empty Bambu spool. The one this came on is too WIDE for the AMS - it fits in there but creates too much drag for the motor to feed it. For this reason alone I won't buy this brand again until they put out a notice that the spools will be a little more narrow.

I tried out the first roll of glow in the dark filament in my FLSUN V400 3d printer. On the first print the filament broke apart in several places and jammed up the the extruder head before the print was 50% complete. I had to take apart the extruder head to get all the broken filaments out.Also, the 3d print did not glow in the dark for very long. only for about 1/2hr.I put the filament back into the box and returned it to Amazon

Wound beautifully on the reel. Prints fast and holds together or it can print at .12 and look fantastic. There are a lot of good but inconsistent products out there, but This is a Great filament.

Très très bons produi

Schöne Farben.

TIP:General Printing: 215C nozzle, 60C bed, 50mm/sBridging: still haven't sorted - could be a slicer issueReducing temperature to 200C after first couple mm gives a smoother sheen in my opinion.Nice way to get a selection of colors. Good for simple uncomplicated prints. Requires drying before use. Comes with spare nozzles which is a bonus.I received this initially as a gift. Of the 12 rolls, only 5 were properly vacuum sealed. I received a replacement package after struggling.... only 2 or the 12 rolls were sealed.The struggle:I was having trouble getting the filament to stick. Dikale responded very quickly with the above settings which have sorted the issue. Any lower and it will not stick.I was also having trouble with the filament breaking, even mid-print. I was so frustrated that my brand new filament was so brittle. Dikale advised that they were now sending out filament that was dryer and offered to replace the filament. They promptly did so. I received the exact same lot # that I already had and this time only 2 of the 13 colors were sealed.....yeah.Drying the filament for 8 hours did improve the quality of the print but it continues to snap. However, it appears to be snapping only at the end of the print job now. 14" wasted each print. I have actually ordered a splicer to try and recover some of the snapped filament.It still struggles with really complicated designs with a lot of direction changes. But I have been printing little pots and simple projects and it does a decent enough job for that.This works well for trying out colors on simple projects. I wouldn't recommend this for complicated designs or those requiring a multi-day print timeline.I would order Dikale again on sale because the company was very responsive. I wish the replacement package had, in fact, been the new "dryer" filament they said they were now using. Hopefully, the next order would be dry to start with but at least I know it prints simple objects well as-is.

Die Temperatureinstellung ist ein bisschen tricky. Braun extrudiert z.b. stärker als Grün und man muss ein wenig spielen. Sonst aber Top für meinen P1S und mit Adaptern auch für das AMS geeignet.

Das ganze Filament ist absoluter Müll und ich rate jeden davon ab es zu bestellen.Ich kann gar nicht die guten Bewertungen verstehen.Es hakt, verstopft, stinkt und ist mehrere male falsch aufgewickelt.Ein Druck über mehrere Stunden muss man die ganze Zeit überwachen, da es nur Probleme mit dem Filament gibt.Es ist wirklich dreist so ein Schrott zu verkaufen.Unglaublich....