Draw-Tite 76112 Class 3 Trailer Hitch, 2 Inch Receiver, Black, Compatible with 2011-2020 Toyota Sienna

Just got it today and installed same day by my self it took me 2 hours without lifting the car only took long cause one of the bolt from left side did not line up ( maybe was drop during shipping was sticking out from the box when I received it ) I only put 5 bolts instead cause I don’t want to remove it after I’m only using it for 4 bicycle racks. My advice is if you do it your self lift up the rear end and get another person to help you this hitch is a tank. Make sure you torque the bolts to 75# or 80# don’t rely on hand tight ( lying on the ground tightening isn’t fun ) Looks really nice and the best hidden hitch for Toyota sienna out there.

Looks to sit higher than the competition and is entirely hidden except for the business end. Exhaust clearance issue was a little frustrating, but a known issue from reading reviews. I felt ground clearance was a more concerning issue on competing designs, so went into this knowing I might have to tackle exhaust clearance.Installation went easily enough. With a 9 year old vehicle, the installation points had weather proof covers on them to seal out corrosion or debris. The holes lined right up, the bolts threaded right in with fingers. There was some snaking the frame into place, but only the lower plastic undercarriage cover had to be removed. Slide the exhaust side in first to squeeze it between the tailpipe and trunk tray. Bend the undercarriage cover mount tabs down to a 45 degree angle. Lift the exhaust side frame up to start a bolt. Snake the receiver between the bent mount tabs and bumper cover mount holes to get the other side into place and start a bolt in that side. Install the rest of the bolts. Easy.My one area of trouble was the exhaust pipe lying too close to the receiver frame. That was definitely going to make some noise. My exhaust pipe sat a little left of center of the bumper cutout compounding the issue. I coaxed the pipe so it sat right of center and ground some of the receiver frame off to improve clearance. Probably lost a little strength there, but have no intention of towing anything close to 3500 lbs. I knocked a star off for this issue.After that, notching the undercarriage cover and putting things back together finished the job. Bike rack ready.Now, onto the wiring...

It is one heavy son of a gun to lift into place! That’s ok, it isn’t the first one that I installed. You do not have to remove the muffler hanger. I stuck a one inch diameter dowel into the tail pipe and shoved the pipe over a couple of inches. I then was able to support that end of the hitch on top of the pipe. I was then able to use a hydraulic jack to balance the weight of the hitch and move it precisely into place. All holes lined up perfectly and the hitch fitted precisely in place. The only problem is very minor. The clearance notch cut in the splash plan needs to be 1/2” deeper to allow the hitch to fit through. All in all, everything was there, it fit the way it is supposed to and most of the hitch is nicely hidden

It fits any Toyota Sienna 2011 and up, Amazon was saying it did not fit my 2017 Sienna SE but it fit without any issues. Very easy to install, the intructions said to remove facia and move muffler out of the way but it was not necessary for me. It may take a little extra elbow grease but it can be done. The hardest part was to lift it up since its a bit heavy but once at least 1 bolt is in on each end it just gets easier from there, I did use some Thread Lock on bolts just to make sure bolts won't come loose (which they should not) just a little more piece of mind. It may scrape once is fully loaded and with a basket on there so he careful while entering or leaving a property.

I bought this trailer hitch since it tucks underneath the Sienna's under carriage plastic cover. Very elegant look with just the hitch exposed. The kit comes with instructions but i would recommend googling for video instructions for installation.I recommend for the installation to be performed by 2 people. You will need to elevate the rear of the van. I just reversed on to two ramps and i had enough space to work under from. (Keep track of the the bolts and pins removed from underneath)The trailer hitch is nice and sturdy. All bolts included.The van's under carriage plastic cover will need to be cut. The included instruction's will work as a visual aid for this part.I did not do any electrical wiring since i do not plan on towing a trailer (yet). Nor is any electrical wiring part of this kit. I needed a trailer hitch for a bike rack and most importantly to protect the van from parallel parkers.To summarize, I highly recommend this trailer hitch. It hides well under the van. It feels well put together. It can definitely be installed at home. Amazon had the item listed at the best price. If you need a trailer hitch for a sienna, buy this one! Even if you have someone else install it.

We took this item to the shop and just received a call from them — the item is slightly off and cannot be installed!We have to pay for the return shipping of the defective item now, we don’t have time to order and wait for another one, we end up paying extra for buying a replacement at the shop and for their tome trying to install the defective item, spend time taking this defective one to the post and all of this hassle!!!

Après avoir visité quelques marchands la plupart voulait m'installer un curt ! Malgré le cout qui sera pareil a la fin je suis entièrement satisfais du produit pour le moment. Je voulais avoir cette attache-remorque parce que il est caché dans le pare-choc. Je l'ai installé rapidement en moins d'une heure après avoir écouté les tutoriels sur youtube. Je n'ai pas eu a décrocher le silencieux et voici quelques photos pour ceux qui veulent voir le dégagement de l'attache-remorque qui se trouve a environ 1 pouce du silencieux ce qui me semble très correct.

This hitch is nice and It almost looks like a factory option as it sits just under the bumper. Installation was simple but requires a 2nd person. Overall a very nice hitch.

Perfect fit no modification needed, fit my 2014 Sienna SE model

Item arrived with no box, or any type of wrapping protecting the frame and as a result there were paint chips and scratches all over the frame.