BTF-LIGHTING WS2811 IC=RGB+IC Addressable Dream Color LED Strip 16.4FT 60LEDs/m 20Pixels/m IP65 Splash Proof Black PCB Flexible DC12V Chasing Effect for Home Indoor Decor(No Adapter or Controller)

If you follow the requirements (12V, enough Watts for the number of LEDs), this LED strip works great. I've paired it with an Arduino Nano running FastLED and it works perfectly right off of the reel. My project requires me to cut each 3 LED group and solder them back together using 22 AWG solid wires. The wires are bent into very tight corners and I was afraid that the solder pads would come off with the amount of bend I put into them. Using needle nose pliers and tools to guide the bend, none of the connection pads on the strip have come loose.I've also received a full strip with no broken LEDs. Pairing with the Arduino and testing with some example libraries shows how bright and easily programming this strip was. I'll definitely be getting another strip (IP67) for a different project when the time comes.

These are great paired with some deep channel light defusers & a good LED controller. I've probably order over 20 so far . Great product

The media could not be loaded. Still needs the wires managed, but the strip soldered great, worked on first startup and perked up the first bookshelf. Using a WLED controller with the WS2811 black indoor strip and a 2amp 12vdv supply on both.

So far these have been working well. Decent price, items as described, and I haven't really ever had any issues with other BTF products. One note is that the color order seems to actually be GBR and not BGR as stated on the product page, but that's easy to figure out with some experimenting. As expected the sticky tape doesn't do great, but I've paid a lot more LEDs where it didn't stick either.

The quality of this LED strip is probably in the top 75% of the LED strips I've used in the past. It is very flexible and workmanship looks good. It is stinky as can be, probably from the clear IP65 coating on the strip. I have not yet tested the adhesion of the strip, but expecting it to be bad like all other strips but I'll update this review if that isn't the case.I wanted to post power numbers since the specs on Amazon listings for power consumption are never correct. These numbers are for the entire strip of 150 LEDs lit:- Idle Current (no LEDs on): 0.102A @ 12V = 1.224W- All on white (R+G+B): 2.460A @ 12V = 29.5W- All on red: 0.903A @ 12V- All on blue: 0.900A @ 12V- All on green: 0.900A @ 12VYou will want to inject power on the far end, because if you power 12V at one end and turn all the R+G+B LEDs on, voltage at the far end is 9.3V.

I have purchase 3 sets of these to date, everyone has worked flawlessly, when paired with a good controller you can do just about every color combination imagined. I will end up purchasing more in the future.

Looks are great. bright LED Lights, easy to connect to controller. Can be cut to length and soldered, and adheres very well. Used to make a Polaris RZR Light Whip.

The lights are nice and bright. I ran it off of a universal power supply that is only 12v/2.1a. You NEED to be running like 4a, but they still work fine. I did have one LED that was stuck on Yellow when the rest are supposed to be White, but other than that, lights work great.If you are wrapping them around something small diameter, be sure to get some clear heat shrink on them ASAP, the silicone begins to break and peel off. I suggest getting them a little warm before wrapping them around anything to make the silicone a little more pliable.All-in-all, great for the price, will be buying them again.