Color N DriveCar Ceramic Coating Kit 50 ml-9H Paint Sealant, Automotive Polish For Color Protection Against Scratches, Stains, Chipping And UV Light, Vehicle Care Deep Gloss Shine Finish, Easy To Use

This kit is fantastic! Everything shown is provided to apply the ceramic coating to your car. Came with 2 applicator sponges and a couple of microfiber towels which are really good quality, there are now some readable instructions in the box rather than the old grey font on a black card! :) (thanks for changing that)Buy a spray bottle to damp your microfibre towel is all I would suggest or maybe color n drive could include an empty pre applicator bottle??Update: 07.10.18I ceramic coated my Ford Focus rs, results are really pleasing the pictures speak for themselves.Applying is really easy just follow the instructions just remember to try get your car as clean as possible before applying this! Yes you can use it over wax not the other way round!1) washed my car using snow foam and micro fibre towels to dry2) poorboys light swirl remover3) wash again to remove all left overs4) wax (didn’t clay bar as my car is pretty new and doesn’t need it)5) ceramic coat following instructions6) top up with future armour by dodo juice which is spot on.The beading is great, I’ve got enough to do another car as well, try and do it with someone as it takes far less time than doing it all on your own.

all ok

Easy to follow instructions, easy to use product but not enough pre treatment for the quantity of enamel

I was happy with it at the start, was working on car for 8 hours to apply it perfectly. Then I leave my car in garage for 2 days. First months it was great, but now when the winter passed, water is spreading again just like before when I didn't have this on my car, so really, if it would cost maybe 50% less and would be easier to apply it it could be perfect product. This way I have some mixed fellings.

Easy to apply, smooth with water spray and polish off. Results are fantastic so far. Preparation is everything.

Works well and lasts enough to cover 3 cars with spare

Followed instructions and applied this on one panel of my car and it stayed tacky, so didn't use it on any other parts of the car and took me 3hrs to remove from the panel I put it on. Would not recommend.

Have to be used smartly for an SUV, however it does what it says on the tin

Risultato impeccabile,ora speriamo solo nella durata nel tempo.

Used on my Tesla Model Y. Good result. Enough ceramic for 2 coats. The pre-treatment though we have just enough. To help spred the ceramic with second quote I sprayed very little distilled water. They should give more micro-fiber and I recommend to wash the microfiber first. By the way after the washing the car, if you do not have a clay to remove last contaminant you can at least use distiled water that you let it damp to suck any materials for few minutes before wiping with very clean microfiber. For Model Y do not forget to do the black plastic trim around wheels as they suck the dirst easily by nature, putting ceramic make them a lot more dirt repellent.

Top produit recommandé si on respecte la préparation avant l’emplois top facile d application. Résultat parfait.

I Applied this to my 2017 Silverado. The truck was brand new at the time, having about 180 miles on it at the time of application.My Thoughts and notes:- I pretty much Ignored the included instructions. They weren't very readable, and had been translated poorly. Thankfully, there's a lot of advice, and lots of videos and tutorials out there to help.Before Applying I did the following -1: Thoroughly Washed the truck2: Clay bar'd it. (I probably din't HAVE to do this, but if one is unsure, i'd highly recommend it.)3: "Pre Treatment" Bottle. I believe this is an alcohol solution. (This, however, IS required)Total Pre-Treatment time was a little over 2.5 hours for me. (The car was pretty clean before hand)As for the application of the coating itself, i applied the coating about 1 section at a time. It was only about 50 degrees outside at the time, so i had to do a little bit of waiting before removing the excess. (7 or 8 minutes at 50 degrees, just a note) Removal was relatively easy, without much smearing to take care of. I switched microfiber cloths about halfway through the job. Total time to apply was a little over 3 hours for me. would have been faster if i hadn't had to wait after each section for it to dry. (Make sure you take your time when removing this stuff, and don't miss spots.)After applying, I actually didn't notice the huge improvement in gloss that a lot of people see. I think this is a) because it was overcast outside, making it a little tougher to tell the difference, and b) because the truck was so new and glossy already.It DID, however, have a marked improvement on shedding water. Just like a fresh coat of wax, this sheds water like nobodies business. How long that lasts, I'll update in the future sometime. Additionally, It was also markedly smoother after application than it had been before.All in all, I'll be VERY happy with this product if a year down the line, it sheds water like it does now.6 Month Update -After 6 months of daily driving, and nightly garage-ing, my truck still does a pretty good job of repelling water, and is still relatively glossy. A touch-less car wash can get rid of whatever road grime comes on my truck pretty easily still, so it's still doing a good job there. Unlike a standard wax job, where I'd probably be looking at a sheet of water on the hood after a rain by now, this one still beads up reasonably well. It seems to be definitely longer lasting than the usual car wax, but at the same time, definitely not quite as water repellent as it was at the beginning. My guess is that I'm about where i would be after 1 to 2 months of using a regular wax, so by my guesstimation this stuff is lasting about 3 to 4 times as long as a regular wax.

Ich hab die Versiegelung eigentlich eher zum Trotz gekauft um zu beweisen, dass es nicht funktioniert. Für den Preis war es sehr unwahrscheinlich.Bin aber dann sehr positiv überrascht worden. Einfache Handhabung, alles was dazu nötig war ist im Set dabei und das Ergebnis ist sensationell. Toller Glanz und eine Oberfläche, die sich schon fantastisch anfühlt. Und der Effekt ist sensationell.Ich hab es bereits schon mehrmals bei meinen Fahrzeugen machen lassen. Nano-, Glas- oder Keramik-Versiegelung. Hat zwischen EUR 800,- und EUR 1.500,- gekostet. War es mir aber wert. Das Ergebnis ist bis jetzt vergleichbar. Jetzt kommt es nur noch auf die Haltbarkeit an. Bislang haben diese immer zwischen 6 Monaten und max. 1,5 Jahre gehalten. Dann war der Effekt deutlich abgeschwächt.Selbst wenn das hier nur 3-4 Monate halten würde, wär es unschlagbar günstig. Macht aber nen sehr guten Eindruck.Ich schreib wieder, sobald ich die Versiegelung erneuern musste.Fazit: Sehr zu empfehlen!