DJI Mavic Pro Skin Wrap Decal Sticker - Carbon Fiber Vinyl Skin Decal Set Remote Controller Battery Body Wrap Waterproof for DJI Mavic Pro

Started peeling off immediately. Simply will not stick. Makes the drone look trashy with bits and pieces of decal sticking out.DO NOT PURCHASE THIS PRODUCT.

its decent not really the same color in the picture little on purple side , that was the least of my worries , but the thing just doesn't stick well as i wanted it to , I wrap a lot of stuff for cars with vinyl and this was nothing like it i cleaned the surface of the drone to make sure it lays down well. When get to step 10 i already see the edges start to pop up so I said ok i have an idea let me finish laying down the rest of the pieces and then after I went to go get a heat gun / hair dryer ( if you going to try this do not recommend holding the heat gun or hair dryer in one position for too long , do it in like a fashion if you were painting or spray painting something ) after a couple of uses of that the stickers still do not want to lay down at all, not saying this is terrible but im very picky when it comes to this type of stuff.

Color was way off and the decals just do not stay adhered tonthe drone . I had plenty of alcahol wipes and cleaned and dried the surface thoroughly before applying , just won’t stay put . The corners of the decals don’t stay put at all .Spend the extra money and purchase the more expensive decal sets .They have all 5 star reviews across the 107 reviewers .

This is the second skin I ordered from this seller, and the first time I ordered orange and it was perfect. This time I ordered the yellow purple and 30% of the decal didn't stick to the drone. The seller's solution was to use a heat gun which didn't work, so again, his solution was to use tape to stick it down. This is unacceptable. I will be using a different company next time I buy a skin.

Good fit, but the decals are too thick to make some of the sharper curves. The decals tend to come off the drone at the edges and not stick. Tried using heat and that helps, until things cool off. I'll probably pull the decals and call this a loss. I don't want to take the chance of a decal getting caught in a prop during flight.

Must say the decal looks awesome. Therefore, it doesn’t stick it falls off, the glue is super crappy. Wish it was better because the drone looks cool.

Very low quality! Not accurate sizes and not stick to the drone.

Did all the prep as nessesary and there are multiple sites that keep peeling up.