Utah Pneumatic Push Connect Air Fittings Kit - 3/8" 2-Pack: 90 Elbow, Tee, Y, Straight (Black Combo)

I really like that you feel the two-step connection when you push the hose or tube into the fitting The release ring is oversized making it easy to remove a fitting but it’s firm so that you’re not worried about accidentally loosening the fitting during installation When you’re moving everything around i’ve used him for 150 psi air line for my compressor and also almost the same pressure for a water pump I use. The two step seal these feelings use is much easier to feel than many other fittings I’ve used The only time I ever had problems with them leaking was because I didn’t push the pipe on the fitting far enough Whenever I use this style of fitting , first I connect one to the pipe ,then I mark the tubing , and finally I take the fitting off This gives you a visual guide of how far the fitting needs to go onto the pipe This is Just one more way you will know that the connection is soundI REALLY LIKE THESE !!!

Good product quick shipping

I really like the ease and quality of this product.These are really nice connectors. If they leak, the tubing is probably not pushed in all the way. When you push the tubing into the connector, you have to make sure to push them past the second point of resistance. I believe the first thing you feel that might be confusing is the prongs that keep the tubing from blowing back out of the connector. The second point of resistance that you push into is the actual sealing ring. You have to push hard but you will know when it is all the way in.If you are not sure, remove the tubing from the connector and try again. If you have leaks, it's probably because the prongs are engaged to hold the end of the tubing against the sealing ring but the tubing is not fully seated inside the sealing ring.I have a few connector where the tubing is sort of angled into the connector because the tubing is being pulled from an odd direction but not a single leak.

Have not had a problem yet. No leaks

These fittings worked great. Because of a previous review I made sure to keep pushing the hose on after I felt the first resistance. I had to pull a couple out and try again to make sure it was all the way in, just keep pushing and it will pop in. Glad I read the review on how to install correctly, worked great.

Item arrived on time. Although I like the full metal push connectors these plastic push in line is okay. If a line is put in the smallest bind it will leak from the plastic push in connector . These connectors worked out good and has had no issues yet with them. The only quirk I have is I think there should have been more connectors in the offer. There is more bends in the line then thought and more elbows would have been nice. In all They work and worth the low price, just wish more elbows were in package XD......Thanks

I bought both the 1/4 & 3/8 packages to have some on hand for our couple of class 5 & class 8 trucks. They were shipped very fast. The packaging is fantastic, it was packaged so well that it almost looked like a well-marketed beef jerky company packaging. They come with 2 of each type of fitting. I will have to order some more packages so I can make a nice stock case of fittings for when we do need them.I highly recommend these 100%.

Leaks like no other loose almost 120 psi of air over 8 hours of sitting leak tested the hole system came back to these leaking made sure my cuts were perfect and reinstalled and it made it worse